Professional System-Level Control for CNC Manufacturing, Robotics and Automation
Site Search:



Please see the Tips and Suggestions for Leaving Comments below


For answers to your questions, please e-mail info@dynomotion.com

Comments (19)

Topic: Reviews
Sort
5/5 (19)
1 2 > Last
Facebookdel.icio.usStumbleUponDiggTechnoratiGoogle+RedditTwitterLinkedIn
Gravatar
Full StarFull StarFull StarFull StarFull Star
Siripong Buasim (Thailand)
please advise if i use KFLop to use with robotics application.
16th February 2017 9:13am
Gravatar
Full StarFull StarFull StarFull StarFull Star
Gabriel Hernanadez (Mexico)
HI!! I am looking for a good controller to retrofit my Lathe. Do you recomend Kflop for this aplicatio? Is Kflop capable for threading'
Thanks... Gabriel Hernandez
4th August 2016 12:01pm
Gravatar
Full StarFull StarFull StarFull StarFull Star
Adolfo (Spain)
Gabriel this board and the support are excellent, the program come with many kind of examples and if you know C language (highly recommended) you could achieve impressive things. About your question, yes, you can do threading at right, at left, conical threaded, eccentric, constant speed surface (CSS), Automatic Tool Change..

example threading
https://www.youtube.com/watch?v=29Q0kOsRWlY

example with G96 function (CSS)
https://www.youtube.com/watch?v=nWrntLmdJqY
4th August 2016 2:01pm
Gravatar
Full StarFull StarFull StarFull StarFull Star
Gabriel Hernanadez (Mexico)
Gracias por tus comentarios. Acabamos de encargar el Kflop junto con el Kanalog.
Creo fue una buena eleccion, no soy experto programando C, pero creo saldre avante con la programacion. Gracias....Gabriel Hernandez
10th October 2016 6:28pm
Gravatar
Full StarFull StarFull StarFull StarFull Star
Federico de la Cruz (Argentina)
Amazing products! Bought a Kflop and Kanalog for a Mazak V-10 retrofit, no machine hardware update need. Uses original drives, tachogenerators and RESOLVERS for servo closed loop,resolver accuracy(electric)0.002 mm. Works perfect even with very complicated shapes and high speed. The servo tuning is very easy. I strongly recommend to use KMotionCNC, the trajectory planner works perfect. Anyone who needs help with similar machine, just send email: fdelacruzriz@gmail.com Very pleased with the ... Read More
30th May 2016 6:23pm
Gravatar
Full StarFull StarFull StarFull StarFull Star
Gary Styger (South Africa)
I am currently completing my post-graduate work and I constructed a 3-axis milling machine as part of the scope of work. I initially purchased a motion controller and stepper driver that was recommended to me. Initially it ran well and then the USB connection would disconnect and when re-connecting miss commands in the Gcode. There was no support for this product so I was stuck. I then did investigation and came across the Kflop and Kstep. I wrote numerous e-mails to Tom asking question after ... Read More
25th May 2016 1:07pm
Gravatar
Full StarFull StarFull StarFull StarFull Star
Jean-Luc Michaud (Canada)
I designed and built a 5-axis hot wire foam cutting machine for a project at school. I am a mechanical engineering student, so C-Code and motor control was obviously not my speciality. However, I still chose to buy the KFLOP and two KSTEPS, and I am extremely happy with my choice. The documentation on the website is very complete. Each time that I had a specific question, Tom answered to me within an hour with THE solution to my problem. The KSTEPS are running like magic. They produce almost ... Read More
31st December 2015 6:28pm
Gravatar
Full StarFull StarFull StarFull StarFull Star
Sergei
Best of the best product
3rd September 2015 2:08pm
Gravatar
Full StarFull StarFull StarFull StarFull Star
Cole Larson (US)
I replaced a Dynapath 10 on my Bridgeport mill with kflop+kanalog. The process went without a hitch over a month or so of weekends and the system is a joy to use. The machine is smoother, easier to program and much more accurate.

I can't comment on the support because I HAVEN'T HAD TO USE IT YET!!!!

This is the best product on the market today to use when replacing old CNC controllers!.
6th July 2015 9:37am
Gravatar
Full StarFull StarFull StarFull StarFull Star
Henk Sterk (Malaysia)
Nothing but praise..(user for 3 years) I was looking to build a cnc machine for a while, but couldn't decide which direction to go, so started buying components on ebay like servo drives and controler even bought the software (Mach III). Lucky enough I found a second hand EDM machine from 1995 (good for cnc milling rebuild), the control panel has gone up in smoke (so the price was very cheap), it has 3 Heinenhain glass scales and C3 ball screws. So I started to get very excited about the ... Read More
6th April 2015 8:52am
1 2 > Last
Page 1 of 2

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Numeric Link Email Image Video
 
1200
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
I have read and understand the privacy policy. *
 



Tips and Suggestions for Leaving Comments:

  • Tell us which products you have and are reviewing.
  • Briefly describe your application.
  • Tell us how long you have used Dynomotion products.
  • Mention something about your own experience.
  • Provide links to any videos and pictures that will help others understand your application and setup.
  • Your e-mail address is kept confidential and never displayed. It is only used for notifications about your comment and for service issues.
  • We have a mixed audience, please keep your comments professional. Dynomotion reserves the right to censor reviews for offensive content.
  • If you have negative comments to leave, please first give Dynomotion the professional courtesy to correct any issues you may be experiencing. E-mail support@dynomotion.com.










Copyright © Dynomotion, Inc.