Difference between revisions of "KFLOP C Programs"

Revision as of 13:05, 25 July 2017

C Programs provide a powerful and flexible capability to perform almost any sequence of operations within KFLOP.   In most cases after you have tested and tuned all your hardware using the KMotion.exe setup program all the settings and initialization steps required for your system can be placed into an Initialization C Program so that your system can be fully initialized simply by executing the Initialization program.   Using a C Program offers full flexibility to initialize your system however and in whatever order you wish.  In most common cases an existing example can be used with simple modification of values specific to your system.  The KMotion.exe Setup program has some automatic capability to translate the Axes Screen Values that were determined by you during configuration and testing into C Code.

Initialization C Program

The Initialization C Program will normally perform operations of the following type:

• Enable/define any Option boards present (ie.    KStepPresent=TRUE;      // enable KSTEP input multiplexing)
• The setting of Axes parameters (ie.    ch0->Accel=200000; )
• Enable Axes (ie.EnableAxisDest(0,0); )
• Define the Coordinated Motion Axes (ie.    DefineCoordSystem(0,1,2,-1);  // define axes for XYZ
• Forever Loop to service any continuous requirements such as MPG, External Buttons, EStop, etc

Adding the configuration for a new Axis to your Initialization C Program:

1. Configure the Channel in KMotion.exe and verify that after Pushing "Enable" (which downloads and enables) it all works properly
2. On the Config/Flash Screen Push the "C Code To Clip Board" Button
3. Open your Initialization Program in the C Programs Screen
4. Position the cursor after the previous Axis settings
5. Right Mouse Click "Paste"
6. If desired also enable the axis by inserting EnableAxisDest(xx,0); where xx is the Axis number
7. Save the file
8. Test after a power cycle if the C Program initializes all Axes Properly

Programming References

For general C programming references/tutorials, see the links listed near the bottom of this page.

For KFlop specific references, all available variables and functions are listed in the KMotionDef.h file, located within the DSP_FLOP directory at \DSP_KFLOP. An index of the available variables and functions can be found in the KMotionDef page.

Simplest C Program

It is important to understand that any KFLOP C Program consists of a minimum number of parts as shown below. 

The first part is an #include statement which includes a

definition file that defines all the functionality available in KFLOP.  The KMotionDef.h file is included with every installation to define all the functions, variables, structures, and defines available in that Version.  It is located in the DSP_KFLOP subdirectory of the installation.  Open it with the KMotion.exe C Programs Screen to see what's available.

The next part is the "main" function. This is where execution of the program will actually begin. 

The last part is the code that is to be executed and belongs to the main function.  Curly brackets { } define the beginning and end of the function.  This example contains only one print statement to be executed. Note how the code within the curly brackets is indented (using a tab or spaces) to show that it belongs to the main function block.  This indentation is not required but helps readers see the program structure.  Instructions must end with a semicolon ';'.   Double forward slashes allow comments to be added at the end of an instruction.  

1. include "KMotionDef.h"
   main()
   {
       printf("Hello World!\n");  // send message to console
   }

Basic Disk Read/Write

KFLOP has no file system on its own, but when connected to a PC with a PC App running it can do basic Disk Read or Write Operation.  Read capability was recently added in Version 4.33q.  There isn't any PC Keyboard access (getchar()).  See the KmotionDef.h file for supported functions:

// Note: standard C language printf
int printf(const char *format, ...);             // Print formatted string to console
int sprintf(char *s, const char *format, ...);     // Print formatted string to string

typedef int FILE;
FILE *fopen(const char*, const char*);           // Open a text file for writing on the PC (2nd param = "rt" or "wt")
int fprintf(FILE *f, const char * format, ...);           // Print formatted string to the PC's Disk File
int fclose(FILE *f);                           // Close the disk file on the PC

int Print(char *s);                              // Print a string to the console window
int PrintFloat(char *Format, double v);          // Print a double using printf format, ex "%8.3f\n"
int PrintInt(char *Format, int v);               // Print an integer using printf format, ex "result=%4d\n"
                                
int sscanf(const char *_str, const char *_fmt, ...); //scan string and convert to values

#define MAX_READ_DISK_LENGTH 1024 // max allowed length of disk file line length
extern volatile int read_disk_buffer_status; //status of read disk buffer 1=line available, 2=error, 3=eof
extern char read_disk_buffer[MAX_READ_DISK_LENGTH+1];
char *fgets(char *str, int n, FILE *file); //read string from PC disk file, str=buffer, n=buffer length, f=FILE pointer, returns NULL on error
int fscanf(FILE *f, const char *format, ...); //read sting from PC Disk file, convert values, returns number of items converted
int feof(FILE *f);   // End of file status for disk reading

Simple DiskReadWrite.c example

include "KMotionDef.h"

main()
{
    FILE *f;
    char s[256];
    double a=123.456,b=999.999,c=0.001;
    double x=0,y=0,z=0;
    int result;
    
    // write 3 comma separated values to a disk file
    f=fopen("c:\\Temp\\KFlopData.txt","wt");
    fprintf(s,"%f,%f,%f\n",a,b,c);
    fclose(f);
    
    // read them back in
    f=fopen("c:\\Temp\\KFlopData.txt","rt");
    if (!f)
    {
        printf("Unable to open file\n");
        return;
    }
    
    // read a line and convert 3 doubles
    result=fscanf(f,"%lf,%lf,%lf",&x,&y,&z);
    fclose(f);
    
    printf("# values converted = %d, x=%f, y=%f, z=%f\n",result,x,y,z);
}

Global Persist Variables

KFLOP contains a global array of 200 32-bit integer variables that can be used to save values from one program execution to the next or to share values between Threads or Programs.  The values default to zero on KFLOP Power up but if the variables are changed and Flash User Data is performed to KFLOP the values will persist after the next power cycle.  From C the values can be accessed as (where xxx is a number 0-199):

persist.UserData[xxx]

32-bit Floating point variables can be read or written to the variables using casting.  The technique to avoid a compiler conversion to integer is to take the address of the variable, cast it to a pointer to an integer, then de-reference the pointer.  The C syntax is:

persist.UserData[xxx] = *(int *) & my_float;

my_float = *(float *) &persist.UserData[xxx];

64-bit Floating point variables can be read or written to a pair of UserData Variables.  Using these functions (KflopToKMotionCNCFunctions.c)

double GetUserDataDouble(int i)
{
    double d;
    ((int*)(&d))[0] = persist.UserData[i*2];
    ((int*)(&d))[1] = persist.UserData[i*2+1];
    return d;
}

void SetUserDataDouble(int i, double v)
{
    double d=v;
    persist.UserData[i*2]   = ((int*)(&d))[0];
    persist.UserData[i*2+1] = ((int*)(&d))[1] ;
}

The PC can also access these variables with Console Script Commands:  SetPersistDec,  GetPersistDec,  SetPersistHex,  GetPersistHex.

For easy and fast access several persist variables are uploaded in the KFLOP Main Status Record as defined below in PC-DSP.h.  Certain PC Applications like KMotionCNC make use of these to receive commands from KFLOP to perform various actions.  The supported command codes are defined in PC-DSP.h

define PC_COMM_PERSIST 100  // First Persist Variable that is uploaded in status
#define N_PC_COMM_PERSIST 8  // Number of Persist Variables that are uploaded in status

The member variable of Main Status:

int    PC_comm[N_PC_COMM_PERSIST];// 8 persist Variables constantly uploaded to send misc commands/data to PC

Threads and KMotion.exec C Programs Screen

KFLOP can have multiple (1 System Program and up to 7 User ) programs loaded into memory and executing concurrently.  Each program gets a time slice of execution time on a deterministic periodic basis.  For more information see here:

The KMotion.exe C Programs Screen contains C Source Code Edit Windows that facilitate editing, developing, compiling, executing, and debugging C Programs.

A common misconception is that the KMotion.exe Source Code Edit Windows is the same as what is currently in the KFLOP Thread Memory Spaces.  This is not necessarily the case.  If the Source Code has not been Compiled and Downloaded to the KFLOP Thread then something else may be in the KFLOP Thread Space.  KMotion.exe remembers what Programs were last loaded into the edit windows but again this is not what might be what is in KFLOP.  After all the C Programs have been developed the KMotion.exe C Programs Screen is no longer used or needed.

C Source code is not downloaded to KFLOP.  Only the compiled binary executable code is downloaded to KFLOP memory.  There is no means of recovering the C Source Code from only the binary executable code.

Although C Programs can be Flashed to KFLOP memory so they will be present in KFLOP Memory on Power up this is not normally recommended and not usually required.  KFLOP normally powers up with no C Programs in Memory.  Programs can be compiled, downloaded, and executed dynamically in Threads by Applications at run time. They do not need to be pre-loaded (or Flashed) into KFLOP Memory.  For example when KMotionCNC executes GCode and encounters an M3 it may download the configured C Program to the Configured Thread and execute it.  

Note that different programs can be executed in the same Thread Space as long as they are used at different times.  If a new program is downloaded to a Thread that has a previously loaded program executing, the previous program execution is halted and then the new program is loaded into the Thread's memory.

C Program Size and Stack Limitations

Each of the first 6 User Thread Memory Spaces are limited to 64KBytes (65536 Bytes).  Thread 7 is larger and limited to 5x64KBytes (327680Bytes).

If subsequent Threads are unused it is possible to overflow into their Thread Spaces.

When compiling a message is displayed showing the Memory Usage.  The total value indicates the total amount of memory used and must fit into the allowed memory space.

No Errors, No Warnings, text=100, bss=0, data=14, total=160

Each User Thread Stack is located in precious single cycle (5ns) internal memory and is 2 KBytes in length.  Care should be used to limit stack usage.  Overflowing the stack will likely cause KFLOP to crash.  Local variables (defined within functions) and passed function parameters reside on the stack.  Large variables should be defined as Global Variables or in the 8 MByte Gather Buffer

Gather Buffer

KFLOP contains a relatively large global array (8MBytes) of 1 million double precision floating point values that can be used by C Programs.   It is often used for capturing/gathering data so it is named the gather_buffer.  KMotionCNC Step Response Screen uses this memory.  But the memory can be used for any purpose.

The Gather Buffer is defined in KMotionDef.h as:

define MAX_GATHER_DATA 1000000 // Size of gather buffer (number of doubles, 8 bytes each).                   
extern double *gather_buffer;   // Large buffer for data gathering, Bode plots, or User use

C access syntax is gather_buffer[xxx] where xxx is in the range 0 ... 999999.

The gather_buffer pointer can be cast as other types to make use of the memory.  ie:

int *gather_buffer_int = (int *)gather_buffer;

The PC can also access the gather buffer with Console Script Commands: 

GetGatherDec  SetGatherDec  GetGatherHex  SetGatherHex

Performing multiple Operations continually in a forever Loop

It doesn't make logical sense to have more than one forever loop in a program.  That would be like saying to someone go and check if any mail arrived over and over forever and then when you are done with that go and check if someone is at the back door over and over forever.  Obviously the back door will never get around to being checked. 

The solution is to create a single loop that checks two things each time through the loop.   #1 go check the mail, #2 go check the back door, # 3 repeat.   Using this technique any number of things can be continuously performed in a single loop. 

There is one catch with this technique. None of the operations should "block" or take a significant amount of time to perform.  If you were to perform an operation that took a long time to complete all the other continuous operations would be blocked and go unserviced for that period of time.  If it is required to do something that takes a significant amount of time then the solution is to break it down into pieces (states) that can be each performed in an insignificant amount of time.  For example say you wish to activate a lubrication relay for 2 seconds each time a button is pushed.  Instead of delaying 2 seconds you would instead record the time the relay was turned on, then go off and do other things while frequently returning to see if it is time to turn the relay off.

Below is an example to cycle an IO bit continuously based on time.  Note that although this is a complete example for testing you would normally already have a forever loop in your Initialization program.  In that case only add the ServiceTimerSequence Function to your Initialization Program and add the Function call to your existing forever loop.

#include "KMotionDef.h"

void ServiceTimerSequence(void);

main()
{
	for (;;) // loop forever
	{
		WaitNextTimeSlice(); // execute loop once every time slice
		ServiceTimerSequence();  // service the timer sequencing
	}   // end of forever loop
}


// sequence an IO Bit Based on Time in a non-blocking manner

#define TIME_ON 5.0 //seconds
#define CYCLE_TIME 15.0 //seconds
#define OUTPUT_BIT 46 // which IO bit to drive
void ServiceTimerSequence(void)
{
	static double T0=0.0;  // remember the last time we turned on
	double T=Time_sec(); // get current Time_sec
	
	if (T0==0.0 || T > T0 + CYCLE_TIME) T0=T;  // set start time of cycle
	
	if (T < T0 + TIME_ON)  // are we within the TIME_ON section of the cycle?
		SetBit(OUTPUT_BIT);  //yes
	else
		ClearBit(OUTPUT_BIT);  //no
}