From Dynomotion

Jump to: navigation, search

Kanalog Hardware Info

272 bytes added, 17:07, 11 May 2017
Max Output For DACs
# load the <span class="skimlinks-unlinked">KanalogInitialPID.mot</span> configuration
# '''Change the Input Channel and Output Channel settings''' to the Encoder and DAC you want that motor to use (ie. #1 and #1)
==Max Output For DACs==
Note the Maximum Output range for the DACs is +/-2047 DAC Counts.  Attempting to output larger values will cause a wraparound effect and runaway or following error fault.  So set the Max Output to 2047 or less.
==Testing Analog Amplifiers==