RTCP 5 axis machine

Moderators: TomKerekes, dynomotion

Post Reply
Ukr-Sasha
Posts: 3
Joined: Tue Jan 23, 2018 5:39 am

RTCP 5 axis machine

Post by Ukr-Sasha » Mon Jan 21, 2019 4:49 am

Hello.
Implemented the RTCP function on a 5 axial machine.
It was not the first time.
I had to contact the developer for help.
Thanks to Tom for his help.
The configuration of the machine, as in the picture.
The configuration files Tom sent me.
Result on video.
Kinematics5AxisTableAGimbalB.h
Kinematics5AxisTableAGimbalB.cpp
Three-types-of-five-axis-machine-tools-a-spindle-tilting-b-table-tilting-and-c.png
https://youtu.be/PuIdtZKdYfA
You do not have the required permissions to view the files attached to this post.

User avatar
TomKerekes
Posts: 370
Joined: Mon Dec 04, 2017 1:49 am

Re: RTCP 5 axis machine

Post by TomKerekes » Mon Jan 21, 2019 6:16 pm

Hi Ukr-Sasha,

Very nice work. Thanks for sharing.

I put some of our diagrams on the wiki also.
Regards,

Tom Kerekes
Dynomotion, Inc.

Post Reply