Kstep Cable

Moderators: TomKerekes, dynomotion

Post Reply
magergar
Posts: 3
Joined: Wed May 02, 2018 10:38 pm

Kstep Cable

Post by magergar » Wed May 02, 2018 11:51 pm

Hi, I recently bought a Kstep and Kflop (the second set I have)
and after the assemble I realize the cable that connect the kstep and the kflop is too short
I don't know if the cable is short or the stand up is bigger, Attached are the images with the measures I took
Don't get me wrong, I'm just writing this as a feedback, so this don't happen to someone else, I'm not disappointed with the product
I solved with another cable I have.

regards
German
You do not have the required permissions to view the files attached to this post.

User avatar
TomKerekes
Posts: 190
Joined: Mon Dec 04, 2017 1:49 am

Re: Kstep Cable

Post by TomKerekes » Thu May 03, 2018 12:41 am

Hi German,

Thanks so much for pointing that out. We normally include 1.25 inch (31.75mm) standoffs.

It looks like the cable would be tight even with those.

Regards
Regards,

Tom Kerekes
Dynomotion, Inc.

Post Reply