Moderators: TomKerekes, dynomotion
- Posts: 8
- Joined: Wed Mar 18, 2020 3:27 pm
Dear Kflop World,
I want to run a stepper drivers through the Kflop and Kanalog, where to wire the step/dir signals to the stepper drivers? is it possible withour the Kstep board?
- Posts: 985
- Joined: Mon Dec 04, 2017 1:49 am
Normally Kanalog is used with Analog Drives not Step/Dir Drives. But using both is possible. Please read the Faqs here