Tuning 2x PID Loops

Moderators: TomKerekes, dynomotion

User avatar
Posts: 982
Joined: Mon Dec 04, 2017 1:49 am

Re: Tuning 2x PID Loops

Post by TomKerekes » Mon Jun 22, 2020 4:35 pm

Hi Matthew,
Is there an alternative TMS320C6722BRFP200 since there are not any available at Digikey

How else could there be 3.2v on the 2.5v reg output if the reg has not failed?
Some current path between the 3.3V and the 2.4V

Anything else I can test to determine what has failed?
Not that I can think of.

Internal layer traces failed possibly?
That would be very unlikely.

Is the 2.5v tolerant of 3.3v?

Tom Kerekes
Dynomotion, Inc.

Post Reply