RTCP 5 axis machine

Moderators: TomKerekes, dynomotion

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: RTCP 5 axis machine

Post by TomKerekes » Sat Jan 11, 2020 5:43 pm

mfc140d.dll is a Debug library. It should only be needed if you run the KMotionCNC.exe in the Debug Directory. Run KMotionCNC.exe from the Release folder. Double click on KMotionCNC.exe in the C:\KMotion435b\KMotion\Release folder.
Regards,

Tom Kerekes
Dynomotion, Inc.

Igor
Posts: 60
Joined: Wed Dec 25, 2019 11:37 am

Re: RTCP 5 axis machine

Post by Igor » Sat Jan 11, 2020 9:06 pm

Thanks for not sleeping at this late hour. But the problem persists with the original file the program works. With a new net.on the screen on the right original file. I don 't have something in my compieter? you need more information and help me?
Attachments
CNC11.PNG

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: RTCP 5 axis machine

Post by TomKerekes » Sat Jan 11, 2020 9:48 pm

Hi Igor,

Did you understand my previous post? Did you do it? What happened?
Regards,

Tom Kerekes
Dynomotion, Inc.

Igor
Posts: 60
Joined: Wed Dec 25, 2019 11:37 am

Re: RTCP 5 axis machine

Post by Igor » Sat Jan 11, 2020 11:20 pm

Yes understood, not working...TeamViewer?

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: RTCP 5 axis machine

Post by TomKerekes » Sun Jan 12, 2020 12:10 am

Hi Igor,

"Not working" is not a very decriptive answer. What happened?

For a fee we can connect into your system and help you with troubleshooting, training, configuration, programming, and tuning. We don't guarantee any specific result. For this we charge $250/hr with a 2hr minimum. Contact support if you would like to do this.
Regards,

Tom Kerekes
Dynomotion, Inc.

Igor
Posts: 60
Joined: Wed Dec 25, 2019 11:37 am

Re: RTCP 5 axis machine

Post by Igor » Sun Jan 12, 2020 8:52 am

Двойной щелчок по KMotionCNC.exe в C: папка \ KMotion435b \ KMotion \ Release.- the program works. However, when you add a file to the "release" folder, the program does not work.

Igor
Posts: 60
Joined: Wed Dec 25, 2019 11:37 am

Re: RTCP 5 axis machine

Post by Igor » Sun Jan 12, 2020 12:13 pm

1 step - I install KMotion CNC 435b. After running the program I receive such notification
CNC A.JPG
..

Step 2 - I copy the replacement file- "DSPKFLOP.out - 14.08.2018"

3 step - added "kinematics" file. At simulation and 5 axial trajectory. there is such picture
CNC.JPG
4 steps - When you add a GCodeInterpreter replacement file, the program does not work. do you understand me?

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: RTCP 5 axis machine

Post by TomKerekes » Sun Jan 12, 2020 3:58 pm

Hi Igor,

Step 1 - Good

Step 2 - Wrong. Do not copy any file. Instead use KMotion.exe | Config/Flash Screen | Flash New Version Button
Regards,

Tom Kerekes
Dynomotion, Inc.

Igor
Posts: 60
Joined: Wed Dec 25, 2019 11:37 am

Re: RTCP 5 axis machine

Post by Igor » Sun Jan 12, 2020 4:32 pm

Step 2 - new version, reloaded board, added file (replacement) GCodeInterpreter. the program is not started.In 3 seconds the program closes
CncERRor.JPG
The program works, but when you press G Viever, it collapses (closes) where you take the correct DSPKFLOP file. Out ?
CNC2.JPG
Last edited by Igor on Sun Jan 12, 2020 5:09 pm, edited 1 time in total.

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: RTCP 5 axis machine

Post by TomKerekes » Sun Jan 12, 2020 5:06 pm

Hi Igor,

The file is "GCodeInterpreter.dll" not "GCodeInterpreter."

Please try the following:
  1. Disconnect KFLOP USB
  2. Rename C:\KMotion435b -> C:\KMotion435bxxx
  3. Install KMotion435b
  4. Delete C:\KMotion435b\KMotion\Release\GCodeInterpreter.dll
  5. Copy new GCodeInterpreter.dll to C:\KMotion435b\KMotion\Release folder
  6. Right click C:\KMotion435b\KMotion\Release\GCodeInterpreter.dll | Properties | Unblock
  7. Windows Security | Virus & threat protection settings | Real-time protection | Off
  8. Double click C:\KMotion435b\KMotion\Release\KMotionCNC.exe
  9. report what happens
Regards,

Tom Kerekes
Dynomotion, Inc.

Post Reply