Axis modes - jog buttons

Moderators: TomKerekes, dynomotion

Post Reply
nice_kflop
Posts: 10
Joined: Tue Aug 31, 2021 11:47 pm

Axis modes - jog buttons

Post by nice_kflop » Thu Sep 02, 2021 4:50 am

Hi, when my axis mode for the closed loop stepper motor and driver are set to "Input: No input, Output: step Dir" I am able to jog it using the KmotionCNC screen. But when I use "Input: encoder, output: CL step" which is the correct setting, the jog button for x axis doesn't move the stepper. Why is that?

User avatar
TomKerekes
Posts: 2527
Joined: Mon Dec 04, 2017 1:49 am

Re: Axis modes - jog buttons

Post by TomKerekes » Thu Sep 02, 2021 4:35 pm

Hi,

Please provide more information. What hardware do you have? Check the KMotion Axis Screen to see if the axis is enabled before and after attempting to Jog. Any messages on the KMotion Console Screen? How are you attempting to Jog? Do you have an encoder connected to KFLOP?
Regards,

Tom Kerekes
Dynomotion, Inc.

nice_kflop
Posts: 10
Joined: Tue Aug 31, 2021 11:47 pm

Re: Axis modes - jog buttons

Post by nice_kflop » Tue Sep 07, 2021 9:13 pm

Got it to work with closed loop and encoder inputs. Thank you.

Post Reply