Axis oscillates after Mach3 estop

Moderators: TomKerekes, dynomotion

User avatar
TomKerekes
Posts: 1515
Joined: Mon Dec 04, 2017 1:49 am

Re: Axis oscillates after Mach3 estop

Post by TomKerekes » Mon Feb 15, 2021 8:09 pm

Hi Brian,

If you reduce the Windows Buffer Ahead Time in the Dynomotion Plugin Configuration Feedhold will be more responsive.

Within KFLOP calling StopCoordinatedMotion(); will perform an instant hardware Feedhold. This can be triggered from an external input as described in this Thread.

Or the Mach3 Screens can add or change a button to Notify KFLOP to make the call.

HTH
Regards,

Tom Kerekes
Dynomotion, Inc.

Post Reply