Hi Brian,
If you reduce the Windows Buffer Ahead Time in the Dynomotion Plugin Configuration Feedhold will be more responsive.
Within KFLOP calling StopCoordinatedMotion(); will perform an instant hardware Feedhold. This can be triggered from an external input as described in this Thread.
Or the Mach3 Screens can add or change a button to Notify KFLOP to make the call.
HTH
Axis oscillates after Mach3 estop
Moderators: TomKerekes, dynomotion
- TomKerekes
- Posts: 2529
- Joined: Mon Dec 04, 2017 1:49 am
Re: Axis oscillates after Mach3 estop
Regards,
Tom Kerekes
Dynomotion, Inc.
Tom Kerekes
Dynomotion, Inc.