Dear Kflop World,
I want to run a stepper drivers through the Kflop and Kanalog, where to wire the step/dir signals to the stepper drivers? is it possible withour the Kstep board?
Best Regards,
Kflop and Kanalog Step and Direction
Moderators: TomKerekes, dynomotion
- TomKerekes
- Posts: 2529
- Joined: Mon Dec 04, 2017 1:49 am
Re: Kflop and Kanalog Step and Direction
Hi REGENS,
Normally Kanalog is used with Analog Drives not Step/Dir Drives. But using both is possible. Please read the Faqs here.
Normally Kanalog is used with Analog Drives not Step/Dir Drives. But using both is possible. Please read the Faqs here.
Regards,
Tom Kerekes
Dynomotion, Inc.
Tom Kerekes
Dynomotion, Inc.