PID Settings for KNozz Board

Moderators: TomKerekes, dynomotion

Post Reply
Posts: 134
Joined: Tue Feb 20, 2018 7:35 am
Location: India

PID Settings for KNozz Board

Post by AmitKumar171 » Thu Jun 28, 2018 7:39 am

Hi Tom,

I am using Knozz board connected with kflop board.

I have connected thermistor Semitec 104GT2 100K ohm thermistor.

When is set the temperature of 200 degrees using m code i am not getting exact temperature. as you said it is 1degree accurate.

How to make it temperature and ADC count graph value accurate. ?

Or i have studied PID temperature control used by arduino board. Proportional Integrative Derivative (PID) Based temperature control is accurate but it is not available with current Knozz Board.

Above link explains PID based temperature control.

How to implement PID settings into Knozz Board.

Waiting for positive response.

Thank you

Thank You


User avatar
Posts: 2604
Joined: Mon Dec 04, 2017 1:49 am

Re: PID Settings for KNozz Board

Post by TomKerekes » Thu Jun 28, 2018 4:50 pm

Hi Amit,

You asked the same question here

Tom Kerekes
Dynomotion, Inc.

Post Reply