DRO Lable for positions of U and V axis.

Moderators: TomKerekes, dynomotion

Post Reply
AmitKumar171
Posts: 9
Joined: Tue Feb 20, 2018 7:35 am
Location: India
Contact:

DRO Lable for positions of U and V axis.

Post by AmitKumar171 » Mon Sep 24, 2018 5:55 am

Hi Tom,

I am using Kflop Board and I want to display the U value and V value on my DRO similar to the of X, Y, Z, A, B, C axes.

Here is the attached image
Screenshot (105).png
.

Is it possible to make U DRO Similar to above axis so it shows Machine coordinates/Fixtures/Simulation mode/ Encoder mode also. ?

If Yes the please guide me how to do that.

Waiting for your kind reply.
You do not have the required permissions to view the files attached to this post.
Thank You

AMIT KUMAR

User avatar
TomKerekes
Posts: 226
Joined: Mon Dec 04, 2017 1:49 am

Re: DRO Lable for positions of U and V axis.

Post by TomKerekes » Mon Sep 24, 2018 4:43 pm

Hi Amit,

Its not common to need more than 6 axes. When there are more than 6 axes they are usually something like an Extruder that wouldn't need a DRO.

It would take a fair amount of work to expand KMotionCNC to fully 8 axes. It would involve the DROs, Transforms, Expanding Screens, Jog Buttons, Jog Speeds, Offset Tables, Zero/Set Buttons, etc...

The KMotionCNC Source Code is all available to you if you would like to add that functionality yourself.

Or basic DRO capability can be added with the Screen Editor.

If this appears to be useful to other Users we will consider adding it in the future. Thanks for the feedback.

Regards
Regards,

Tom Kerekes
Dynomotion, Inc.

AmitKumar171
Posts: 9
Joined: Tue Feb 20, 2018 7:35 am
Location: India
Contact:

Re: DRO Lable for positions of U and V axis.

Post by AmitKumar171 » Mon Oct 01, 2018 6:25 am

Hi Tom,

Thanks for the reply.
Thank You

AMIT KUMAR

Post Reply