DIY Collet-Spinning ATC - Adapting Linear ATC C Programs?

[Tim G]

Thanks a ton! The M6 command was setup as just Exec/Wait. Once I changed it to Exec/Wait/Sync, it worked perfectly fine. I'll probably fine tune the post processor a bit, but it's officially up and running with automatic tool changes:).

[Tim G]

Figured I'd post a video of the tool changer doing a test file in wood to show the final result. I've got a few more tweaks to make, but the work flow is there and everything is working as expected. Thanks again for all of the help!

https://photos.app.goo.gl/LY1pxkkWhsiktbZy9