KNozzle - Hot on startup

Moderators: TomKerekes, dynomotion

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: KNozzle - Hot on startup

Post by TomKerekes » Thu Apr 02, 2020 12:32 am

Hi Scott,

The 1000 ohm Version might work reasonably well.

32208571

Connected directly to KNozz the resolution would be 1.1 ADC Counts/Degree

Device current would be maxed out at 0.3ma

See Plot below:

RTD.png
Attachments
RTD.xlsx
(16.27 KiB) Downloaded 71 times
Regards,

Tom Kerekes
Dynomotion, Inc.

Post Reply