We are in the process of testing our system for EMC, and probably have to re-spin the motherboard design. What level of ESD protection is implemented on the kflop USB interface (IEC 61000-4-2 rating)?
Regards,
SJH
Kflop USB ESD rating
Moderators: TomKerekes, dynomotion
- TomKerekes
- Posts: 2543
- Joined: Mon Dec 04, 2017 1:49 am
Re: Kflop USB ESD rating
Hi SJH,
The ESD protection is described here as:
2.2.1Electrostatic Protection FTDI ICs are tested for ESD protection between 2.5KV and 3KV.
The USB signals are connected directly to the USB-B connector without any other components.
HTH
The ESD protection is described here as:
2.2.1Electrostatic Protection FTDI ICs are tested for ESD protection between 2.5KV and 3KV.
The USB signals are connected directly to the USB-B connector without any other components.
HTH
Regards,
Tom Kerekes
Dynomotion, Inc.
Tom Kerekes
Dynomotion, Inc.