killed DAC outputs

Moderators: TomKerekes, dynomotion

Post Reply
Scott Pancheau
Posts: 34
Joined: Sat Dec 28, 2019 10:52 pm

killed DAC outputs

Post by Scott Pancheau » Mon Jan 11, 2021 4:00 am

Figured out after I blew the DAC outputs that I had a ground voltage problem on drive. Is the 0 to 10v generated on the kanalog or from the kflop?
Don't know which one I need to order - or both?
Thanks
Scott

User avatar
TomKerekes
Posts: 1238
Joined: Mon Dec 04, 2017 1:49 am

Re: killed DAC outputs

Post by TomKerekes » Mon Jan 11, 2021 7:03 pm

Sorry to hear that Scott,

The +/-10V is generated on the Kanalog. Its hard to say if KFLOP was also damaged. If the other IO on Kanalog is still working then I would think it is likely that KFLOP was not damaged.
Regards,

Tom Kerekes
Dynomotion, Inc.

Scott Pancheau
Posts: 34
Joined: Sat Dec 28, 2019 10:52 pm

Re: killed DAC outputs

Post by Scott Pancheau » Wed Jan 13, 2021 2:40 am

Thanks Tom,
I will just order both,as I plan on retrofitting another machine later.

Post Reply