Usb problem

Moderators: TomKerekes, dynomotion

Post Reply
aaperezd
Posts: 7
Joined: Wed Feb 26, 2020 3:07 pm

Usb problem

Post by aaperezd » Wed Feb 26, 2020 3:15 pm

Hi friends, im Alberto From Chile,

I have tried to connect my kflop through usb but it does not connect, there is a half-second loop where it tries to connect kflop, my laptop detects it then disconnects and then reconnects it and so it repeats, the current configuration is :
kflop + kanalog + konnect.
perform many tests, among them just connect kflop, put jumper 3 and remove the power of 12 volts, but nothing works, what could it be?

Thanks a lot

User avatar
TomKerekes
Posts: 985
Joined: Mon Dec 04, 2017 1:49 am

Re: Usb problem

Post by TomKerekes » Wed Feb 26, 2020 6:20 pm

Hi Alberto,

How are you applying +5V to KFLOP? What are the +5V power supply specifications? USB power is not sufficient when using Kanalog. Remove Jumper J3.
Regards,

Tom Kerekes
Dynomotion, Inc.

Post Reply