KMotion/KFLOP/Kogna Version 5.3.4 Released
Posted: Tue Aug 13, 2024 7:53 pm
KMotion/KFLOP/Kogna Version 5.3.4 Released
Kogna - Fix issue with reading encoders momentarily ‘glitching’ on some binary values ie 256 counts. Encoder Counters are now
synchronized to 16.6MHz Clock before reading.
KMotionCNC - Tool Setup | Trajectory Planner Page now allows mm or inch settings
Kinematics - Add feature for each axis to perform a 1D Linear Table correction (Screw Mapping type). See wiki for more info.
A number of other fixes and features.
Please report any issues.
Complete Change List V5.3.4
Download
Kogna - Fix issue with reading encoders momentarily ‘glitching’ on some binary values ie 256 counts. Encoder Counters are now
synchronized to 16.6MHz Clock before reading.
KMotionCNC - Tool Setup | Trajectory Planner Page now allows mm or inch settings
Kinematics - Add feature for each axis to perform a 1D Linear Table correction (Screw Mapping type). See wiki for more info.
A number of other fixes and features.
Please report any issues.
Complete Change List V5.3.4
Download