Schaublin 102 cnc

Moderators: TomKerekes, dynomotion

Post Reply
Musienko_D
Posts: 5
Joined: Thu Dec 13, 2018 8:47 pm

Schaublin 102 cnc

Post by Musienko_D » Thu Jan 17, 2019 8:19 pm

Modernization of the lathe machine Schaublin 102 cnc
IMG_20181217_092709_HDR.jpg
IMG_20181217_092610_HDR.jpg
IMG_20181217_092626_HDR.jpg
IMG_20181217_092728_HDR.jpg
IMG_20181217_092719_HDR.jpg
After cleaning
IMG_20181217_172531_HDR.jpg
IMG_20181217_172518_HDR.jpg
IMG_20181226_175948_HDR.jpg
IMG_20190107_150803.jpg

Musienko_D
Posts: 5
Joined: Thu Dec 13, 2018 8:47 pm

Re: Schaublin 102 cnc

Post by Musienko_D » Fri Jan 18, 2019 7:06 pm

First test




Musienko_D
Posts: 5
Joined: Thu Dec 13, 2018 8:47 pm

Re: Schaublin 102 cnc

Post by Musienko_D » Fri Jan 18, 2019 7:15 pm

The spindle can work as a rotary axis, the mode will switch according to the M command.
It remains to replace or add the encoder on the spindle, the resolution is too low.




User avatar
TomKerekes
Posts: 2527
Joined: Mon Dec 04, 2017 1:49 am

Re: Schaublin 102 cnc

Post by TomKerekes » Sun Jan 20, 2019 7:18 pm

Nice work. Thanks for sharing. I like your simple Screen.
Regards,

Tom Kerekes
Dynomotion, Inc.

Musienko_D
Posts: 5
Joined: Thu Dec 13, 2018 8:47 pm

Re: Schaublin 102 cnc

Post by Musienko_D » Mon Jan 21, 2019 9:27 pm

TomKerekes wrote:
Sun Jan 20, 2019 7:18 pm
Nice work. Thanks for sharing. I like your simple Screen.
Thank.
The machine is controlled by external buttons, on the monitor only the display of the necessary information.
Now added VertBar, but not enough horizontal bar scale.

Musienko_D
Posts: 5
Joined: Thu Dec 13, 2018 8:47 pm

Re: Schaublin 102 cnc

Post by Musienko_D » Thu Jan 24, 2019 8:37 pm

IMG_20190124_172759_HDR.jpg

Post Reply