Modernization of the lathe machine Schaublin 102 cnc
After cleaning
Schaublin 102 cnc
Moderators: TomKerekes, dynomotion
-
- Posts: 5
- Joined: Thu Dec 13, 2018 8:47 pm
Re: Schaublin 102 cnc
The spindle can work as a rotary axis, the mode will switch according to the M command.
It remains to replace or add the encoder on the spindle, the resolution is too low.
It remains to replace or add the encoder on the spindle, the resolution is too low.
- TomKerekes
- Posts: 2540
- Joined: Mon Dec 04, 2017 1:49 am
Re: Schaublin 102 cnc
Nice work. Thanks for sharing. I like your simple Screen.
Regards,
Tom Kerekes
Dynomotion, Inc.
Tom Kerekes
Dynomotion, Inc.
-
- Posts: 5
- Joined: Thu Dec 13, 2018 8:47 pm
Re: Schaublin 102 cnc
Thank.TomKerekes wrote: ↑Sun Jan 20, 2019 7:18 pmNice work. Thanks for sharing. I like your simple Screen.
The machine is controlled by external buttons, on the monitor only the display of the necessary information.
Now added VertBar, but not enough horizontal bar scale.