STAMA MC010

Moderators: TomKerekes, dynomotion

Post Reply
cemoa9
Posts: 82
Joined: Mon Jun 01, 2020 11:01 am

STAMA MC010

Post by cemoa9 » Sun Aug 28, 2022 4:14 pm

Hello all,

Second machine with Kflop, a STAMA MC010 (also sold as Robodrill) :

-4 axis
-Umbrella type tool changer turned by the spindle
-X & Y 12Nm steppers
-Z and A Chinese servos
-Spindle & drive from China
-Pneumatic chuck

Again here I struggled a while with the noise for the encoders feedback to Kflop, keeping the 6 wires + adapter until Kflop was the solution.

Machine for sale ! :) 7500€ in Hungary.

Cordially,

Francois
Attachments
IMG_0690.JPG
connections_MC01_v1.xls
(103 KiB) Downloaded 6 times
IMG_0760.JPG
IMG_0759.JPG
IMG_0758.JPG
STAMA.zip
(405.39 KiB) Downloaded 9 times
AT_V4_Main.scr
(54.8 KiB) Downloaded 7 times
AT_V4_3D.scr
(54.8 KiB) Downloaded 6 times

Post Reply