Page 2 of 2

Re: Tuning 2x PID Loops

Posted: Mon Jun 22, 2020 4:35 pm
by TomKerekes
Hi Matthew,
Is there an alternative TMS320C6722BRFP200 since there are not any available at Digikey
No

How else could there be 3.2v on the 2.5v reg output if the reg has not failed?
Some current path between the 3.3V and the 2.4V

Anything else I can test to determine what has failed?
Not that I can think of.

Internal layer traces failed possibly?
That would be very unlikely.

Is the 2.5v tolerant of 3.3v?
No