How are the components in the screens set to allow for resizing and/or location shifting when the entire screen is stretched as with the standard "Resizeable 3 axis" screen?
My primary goal is to allow the Gviewer and code to stretch, but the floating locations of the buttons would be nice too.
Glad to see a dedicated forum.
Thanks.
Resizeable screen
Moderators: TomKerekes, dynomotion
-
TomKerekes
- Posts: 2540
- Joined: Mon Dec 04, 2017 1:49 am
Re: Resizeable screen
Hi Madtooler,
The KMotionCNC Screen editor doesn’t have that capability. There is a tool to help make different size screens. See the wiki here.
The KMotionCNC Screen editor doesn’t have that capability. There is a tool to help make different size screens. See the wiki here.
Regards,
Tom Kerekes
Dynomotion, Inc.
Tom Kerekes
Dynomotion, Inc.
Re: Resizeable screen
Thanks, Tom.
I had already looked at the Wiki before I posted. I figured dynamic resizing was a limitation, which I can deal with, but was looking for confirmation.
BTW, I picked up another Kflop and Kstep off ebay and am controlling a mini mill that I will also be adding linear scales for a closed loop. Fun so far
I had already looked at the Wiki before I posted. I figured dynamic resizing was a limitation, which I can deal with, but was looking for confirmation.
BTW, I picked up another Kflop and Kstep off ebay and am controlling a mini mill that I will also be adding linear scales for a closed loop. Fun so far