KMotionCNC Translation

Moderators: TomKerekes, dynomotion

Post Reply
Mateusz
Posts: 16
Joined: Thu Jun 06, 2019 8:36 pm

KMotionCNC Translation

Post by Mateusz » Wed Jun 12, 2019 11:41 am

Hi Tom,

I would like to give a go in KMotionCNC screen translation. I would like to use a VC environment but I have no idea which version would be appropriate, or maybe there are some other tools for it ?
Could you please give me a clue how to start :D. Definitely I'm not skilled person...yet.

Regards
Mateusz

User avatar
TomKerekes
Posts: 615
Joined: Mon Dec 04, 2017 1:49 am

Re: KMotionCNC Translation

Post by TomKerekes » Thu Jun 13, 2019 9:48 am

Hi Mateusz,

Consider using out KMotionCNC Screen Editor. See here.



Otherwise see instructions for editing/compiling KMotionCNC source code here.
Regards,

Tom Kerekes
Dynomotion, Inc.

Mateusz
Posts: 16
Joined: Thu Jun 06, 2019 8:36 pm

Re: KMotionCNC Translation

Post by Mateusz » Thu Jun 13, 2019 10:24 am

Hi Tom,

Yes, I know Screen Editor, I did play with it. I have to translate toolbar and other buttons etc...link what you send me should do a job :)
by the way I should be able to change decimal point accuracy on DRO-s as well ?

Thank you

User avatar
TomKerekes
Posts: 615
Joined: Mon Dec 04, 2017 1:49 am

Re: KMotionCNC Translation

Post by TomKerekes » Fri Jun 14, 2019 3:52 am

Hi Mateusz,

The Screen Editor should allow changing the graphics of the tool buttons as well.

To change the format of the DROs you will need to change the KMotionCNC Source Code and recompile.
Regards,

Tom Kerekes
Dynomotion, Inc.

Post Reply