The .var file

Moderators: TomKerekes, dynomotion

Post Reply
Alexanders
Posts: 33
Joined: Wed May 03, 2023 12:54 am

The .var file

Post by Alexanders » Mon Jun 10, 2024 8:32 pm

Hello! I would really like to see the assignment of variables in the emc.var file. There are no comments in the file. Where can I see it?

User avatar
TomKerekes
Posts: 2604
Joined: Mon Dec 04, 2017 1:49 am

Re: The .var file

Post by TomKerekes » Tue Jun 11, 2024 1:32 am

This is from rs274ngc.cpp

Code: Select all

/*

This is an array of the index numbers of system parameters that must
be included in a file used with the rs274ngc_restore_parameters
function. The array is used by that function and by the
rs274ngc_save_parameters function.

*/

static const int _required_parameters[] = {
 5161, 5162, 5163,   /* G28 home */
 5164, 5165, 5166,
 5181, 5182, 5183,   /* G30 home */
 5184, 5185, 5186,
 5211, 5212, 5213,   /* G92 offsets */
 5214, 5215, 5216,
 5220,               /* selected coordinate */
 5221, 5222, 5223,   /* coordinate system 1 */
 5224, 5225, 5226,
 5241, 5242, 5243,   /* coordinate system 2 */
 5244, 5245, 5246,
 5261, 5262, 5263,   /* coordinate system 3 */
 5264, 5265, 5266,
 5281, 5282, 5283,   /* coordinate system 4 */
 5284, 5285, 5286,
 5301, 5302, 5303,   /* coordinate system 5 */
 5304, 5305, 5306,
 5321, 5322, 5323,   /* coordinate system 6 */
 5324, 5325, 5326,
 5341, 5342, 5343,   /* coordinate system 7 */
 5344, 5345, 5346,
 5361, 5362, 5363,   /* coordinate system 8 */
 5364, 5365, 5366,
 5381, 5382, 5383,   /* coordinate system 9 */
 5384, 5385, 5386,
 RS274NGC_MAX_PARAMETERS
};
Regards,

Tom Kerekes
Dynomotion, Inc.

Post Reply