PC requirements to run KMotionCNC

Moderators: TomKerekes, dynomotion

Post Reply
gui_marchioro
Posts: 57
Joined: Sun Aug 21, 2022 11:22 pm

PC requirements to run KMotionCNC

Post by gui_marchioro » Sun Aug 21, 2022 11:57 pm

Is there minimal PC requirements specifications to run KMotion and KMotionCNC?

I am looking for specs like minimal cpu, ram, gpu...

Thanks,

Guilherme

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: PC requirements to run KMotionCNC

Post by TomKerekes » Mon Aug 22, 2022 12:58 am

Hi Guilherme,

KMotionCNC is not very demanding. If the PC can run Windows 7.0 or later reasonably it should be ok.
Regards,

Tom Kerekes
Dynomotion, Inc.

Roamin
Posts: 25
Joined: Tue Dec 13, 2022 10:34 pm

Re: PC requirements to run KMotionCNC

Post by Roamin » Wed Feb 01, 2023 3:35 pm

Hi Tom,

Hope all is well.

Can you confirm if Windows 11 is supported ? Drivers and all? We are looking to buy a new mini pc dedicated to KmotionCNC but on the software page it mentions XP through 10 , 32 and 64 bits. I would like to make sure before we buy that PC so I know ahead of time if I might need to downgrade it.

Thanks!

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: PC requirements to run KMotionCNC

Post by TomKerekes » Wed Feb 01, 2023 5:25 pm

Hi Roamin,

KMotion should work with Windows 11.
Regards,

Tom Kerekes
Dynomotion, Inc.

Roamin
Posts: 25
Joined: Tue Dec 13, 2022 10:34 pm

Re: PC requirements to run KMotionCNC

Post by Roamin » Wed Feb 01, 2023 8:56 pm

Thanks for the prompt answer.

Post Reply