Tool offsets for lathe

Moderators: TomKerekes, dynomotion

Post Reply
Scott Pancheau
Posts: 50
Joined: Sat Dec 28, 2019 10:52 pm

Tool offsets for lathe

Post by Scott Pancheau » Thu Mar 10, 2022 7:21 pm

My lathe tool offsets has X and Y as the offsets to set. How do I change the Y column to be Z and therefore affect the Z offset amount.
Thanks,
Scott

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: Tool offsets for lathe

Post by TomKerekes » Thu Mar 10, 2022 7:52 pm

Hi Scott,

Use the "Length" column to offset in Z.
Regards,

Tom Kerekes
Dynomotion, Inc.

Scott Pancheau
Posts: 50
Joined: Sat Dec 28, 2019 10:52 pm

Re: Tool offsets for lathe

Post by Scott Pancheau » Thu Mar 10, 2022 9:39 pm

Thanks Tom!

Post Reply