HOW TO ENABLE OPTIONAL STOP M01 IN KMOTIONCNC

Moderators: TomKerekes, dynomotion

Post Reply
AmitKumar171
Posts: 134
Joined: Tue Feb 20, 2018 7:35 am
Location: India

HOW TO ENABLE OPTIONAL STOP M01 IN KMOTIONCNC

Post by AmitKumar171 » Fri Jan 28, 2022 12:26 pm

Hi Tom,

I am using KFLOP+KONNECT for my machine.

I want to use M01 m code to enable optional stop functionality.

It is not working by default, how to make it work and turn off and on M01 functionality.

Here is the reference.
Screenshot (213).png
Waiting for kind reply.
Thank You

AMIT KUMAR

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: HOW TO ENABLE OPTIONAL STOP M01 IN KMOTIONCNC

Post by TomKerekes » Sat Jan 29, 2022 9:31 pm

Hi Amit,

You should be able to add an Action to M1 to conditionally cause KMotionCNC to Halt on the following line. See the example:

HaltNextLineKMotionCNC.c

Be sure to configure the Action to wait.

HTH
Regards,

Tom Kerekes
Dynomotion, Inc.

Post Reply