Exact Stop Mode

Moderators: TomKerekes, dynomotion

Post Reply
CNC_Machines
Posts: 60
Joined: Fri Apr 27, 2018 10:43 pm

Exact Stop Mode

Post by CNC_Machines » Fri Nov 22, 2019 3:49 pm

Greetings,

I am trying to get my the trajectory planner to make "Exact Stops" between each line of G-Code. Is there a way to force it to do this? This youtube video shows that as an option on Mach3. Is there anything like this in KmotionCNC?

https://www.youtube.com/watch?v=XT2Jq76NChM

Thanks!

Scott

User avatar
TomKerekes
Posts: 2529
Joined: Mon Dec 04, 2017 1:49 am

Re: Exact Stop Mode

Post by TomKerekes » Fri Nov 22, 2019 10:20 pm

Hi Scott,

If you set the Trajectory Planner Break Angle to 0 every angular change in direction should cause a complete stop. See here.
Regards,

Tom Kerekes
Dynomotion, Inc.

CNC_Machines
Posts: 60
Joined: Fri Apr 27, 2018 10:43 pm

Re: Exact Stop Mode

Post by CNC_Machines » Fri Nov 22, 2019 10:53 pm

Exactly what I needed! Thanks!

Post Reply