Dynomotion Forum

Hi Tom; my machine is in the latter stages of development , and there is one thing that concern me , and its that with my very limited knowledge of C, programming , when the emergency stop is pressed , (bit 16 in my system) only Kmotion CNC is reset , but all the other bits , don't turn off . I have...

Thank you Tom,
You are a Champ!
Regards
Mariano

ThanksTom , for the prompt answer
Does it means that for voltage source I can use the Kanalog 5v and ground pins to supply the voltage source? If so please can you please provide connection guidance?
Regards
Mariano

Hi;
I’m trying to turn on a AC SSR , directly from the Kanalog JP 13 Opto_0_plus ,and Opto_0_neg , the SSR
Dc input is from 3v to 30vdc .
Can you please tell me is it’s possible? And if so , what is the voltage that I should get between Opto_0_plus and Opto_0_neg..
Thank you
Mariano

Please disregard my last message
I found the problem ,
I did not Write the script , silly me
Thank you for your help

Mariano

Yes , I have renamed the screen Wire Edm .scr On the main tab I select the screen script Wire Edm.scr Then go back to the Control Select screen and to just try it , modify the 46 Momentarily button , by changing its name to Main Pump, then I observed that the name Main Pump, appears on the button no...

HI Tom;
I have followed the directions in the Toggle button video , and yes I can modify the buttons , but after I exit KmotionCnc , and fire
it back again ,the buttons or anything that I have done is no updated , can you please tell me what im doing wrong?
Regards
Mariano

Hi Tom; one question on microstepping setting Im having problems with my stepper motor not being as smooth as I would like with the 10 microstep setting in the driver as I have no other available setting ..Can you please tell me if I can use the microstepping setting in kmotion, so I can combine bot...

Thank you Tom
Regards
Mariano

Hi Tom; thank you for your help, got the program doing what it supposed to do. This program , knows were the limits are , and will throw a feed hold and wont allow to pass any limit, that has been set This bring me to the new feature that I want to implement. I want the controller to look ahead in t...