Search found 1600 matches

by TomKerekes
Fri Jan 07, 2022 6:18 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 15
Views: 121

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Any input can be configured as a limit. Those on KFLOP are only suggestions. See here.

Homing is handled by a C Program which can use any input. See here.

EStop can also be any input(s). It can be monitored in a C Program forever loop and then perform any necessary actions.

HTH
by TomKerekes
Fri Jan 07, 2022 5:01 pm
Forum: C Programs
Topic: DROlabel memory and odd behavior
Replies: 1
Views: 29

Re: DROlabel memory and odd behavior

Hi durundal, The code is somewhat complicated and much of it wasn't posted, but two things come to mind: #1 text is allocated on the Thread's stack and is uninitialized so its contents can be random each time ServiceToolsetter() is entered. Actually this is somewhat large to be placed on the stack a...
by TomKerekes
Thu Jan 06, 2022 9:16 pm
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: Basic XY Screw Mapping - Geo Table
Replies: 12
Views: 3367

Re: Basic XY Screw Mapping - Geo Table

Hi MadTooler,

No new thoughts
by TomKerekes
Thu Jan 06, 2022 8:44 pm
Forum: Configuration Issues
Topic: Changed C program?
Replies: 11
Views: 61

Re: Changed C program?

Hi Scott,

Let's start with the Spindle issue. If you run the INIT Program then Jog the Spindle does it run? Console Screen Jog4=100000?
by TomKerekes
Wed Dec 29, 2021 8:26 pm
Forum: C Programs
Topic: Soft Limit Overshooting
Replies: 5
Views: 60

Re: Soft Limit Overshooting

Haha. Thanks for taking the time to post back.

Good luck
by TomKerekes
Tue Dec 28, 2021 6:24 pm
Forum: C Programs
Topic: Soft Limit Overshooting
Replies: 5
Views: 60

Re: Soft Limit Overshooting

Hi Moray, I'm having difficulty reproducing the problem. I only see about 20 counts of overshoot. I set the soft limit to 200000. But I had to comment out much of everything other than your MPG routine as I don't have your hardware. You might temporarily comment out everything other than the MPG cal...
by TomKerekes
Mon Dec 27, 2021 6:09 pm
Forum: C Programs
Topic: Soft Limit Overshooting
Replies: 5
Views: 60

Re: Soft Limit Overshooting

Hi Moray, Strange it would behave differently on the axis with the same code and parameters. Possibly it might be a following error issue. For example if the axis is moved too fast which results in a large following error so that when the axis catches up it overshoots even though the commanded traje...
by TomKerekes
Wed Dec 22, 2021 5:20 pm
Forum: C Programs
Topic: Axis Movement Restriction Before Homing
Replies: 3
Views: 57

Re: Axis Movement Restriction Before Homing

Hi Amit,

If you power cycle KFLOP the encoder positions will be lost and the axes will be disabled and you will need to re-home.

I don't understand the question about limit switch. Limit Switch disables will not cause a loss of encoder position. Why not try it?
by TomKerekes
Tue Dec 21, 2021 4:45 pm
Forum: C Programs
Topic: Axis Movement Restriction Before Homing
Replies: 3
Views: 57

Re: Axis Movement Restriction Before Homing

Hi Amit, You might not enable the Axes in the INIT C Program. Instead enable the Axes in the Home Program. You might also not reset the machine position to 0 in the INIT C Program as the encoder positions are likely to be still valid after an EStop. To enable axis 0 at the current encoder position y...