Search found 309 matches
- Sat Mar 16, 2024 12:59 am
- Forum: C Programs
- Topic: idk why lathe changes
- Replies: 37
- Views: 443
Re: idk why lathe changes
i take pride in completion.
- Fri Mar 15, 2024 11:28 pm
- Forum: KMotionCNC, G Code Files, Offsets, Post Process
- Topic: need post processor help for dophin cam to kmotion cnc lathe
- Replies: 2
- Views: 54
Re: need post processor help for dophin cam to kmotion cnc lathe
chatbot says this is a good start with the parameters i gave it TITLE: Dolphin CAM to KMotionCNC Lathe Post Processor VERSION: FILEVERSION 1.0 WORDS: :XAXIS = {"X"DDDDD.ddd" "} :ZAXIS = {"Z"DDDDD.ddd" "} :FEEDRATE = {"F"DDDDD.ddd" "} :SPINDLE_CW = {"M03 S"DDDD" "} :SPINDLE_CCW = {"M04 S"DDDD" "} END...
- Fri Mar 15, 2024 11:21 pm
- Forum: KMotionCNC, G Code Files, Offsets, Post Process
- Topic: need post processor help for dophin cam to kmotion cnc lathe
- Replies: 2
- Views: 54
need post processor help for dophin cam to kmotion cnc lathe
so i am needing to match up a new post processor for partsmaster/dolphing CAM to Kmotion CNC i guess what common lathe would share the same PPR? there is a drop down list of them to choose from T_3NE300_V11.ppr T_802-BVDB-15-Aug-13.ppr T_802S_BigDog-V11.ppr T_810D-BTA-V11.ppr T_AL20_HHAIN-V11.ppr T_...
- Fri Mar 15, 2024 10:15 pm
- Forum: Custom Screens, KMotionCNC Screen Editor
- Topic: basic lather with A axis control
- Replies: 9
- Views: 554
Re: basic lather with A axis control
dang, got everything looking good and now cant get any G viewer toolpath
I'm even using the basic 2 axis lathe one
I'm even using the basic 2 axis lathe one
- Fri Mar 15, 2024 12:18 am
- Forum: C Programs
- Topic: idk why lathe changes
- Replies: 37
- Views: 443
Re: idk why lathe changes
ok, i got another used AMC drive ( 250$ ebay ) and the Z axis works as it should again!
everything works.
stoked
everything works.
stoked
- Sat Mar 09, 2024 1:11 am
- Forum: Tuning Servos
- Topic: need some AMC analog amplifier Gain tuning help
- Replies: 16
- Views: 103
Re: need some AMC analog amplifier Gain tuning help
the analog output does not even effect the drive Seems like we just keep going in circles. The DAC voltage must control the level and direction of the motor torque. If it doesn't then the Drive is bad or configured wrong ..... you aint kidding. imagine my confusion over here. :lol: i cant thank you...
- Fri Mar 08, 2024 10:24 pm
- Forum: Tuning Servos
- Topic: need some AMC analog amplifier Gain tuning help
- Replies: 16
- Views: 103
Re: need some AMC analog amplifier Gain tuning help
// Z axis ch1->InputMode=ENCODER_MODE; ch1->OutputMode=DAC_SERVO_MODE; ch1->Vel=8000; ch1->Accel=5e+07; ch1->Jerk=5e+07; ch1->P=5; ch1->I=0; ch1->D=20; ch1->FFAccel=0; ch1->FFVel=0; ch1->MaxI=200; ch1->MaxErr=200; ch1->MaxOutput=2000; ch1->DeadBandGain=1; ch1->DeadBandRange=0; ch1->InputChan0=1; ch...
- Fri Mar 08, 2024 10:22 pm
- Forum: Tuning Servos
- Topic: need some AMC analog amplifier Gain tuning help
- Replies: 16
- Views: 103
Re: need some AMC analog amplifier Gain tuning help
i got the servo strapped to the table
when i have Kmotion on and ready, then turn on the amp the servo will run away immediately and then following error out.....
the analog output does not even effect the drive
- Fri Mar 08, 2024 10:14 pm
- Forum: Tuning Servos
- Topic: need some AMC analog amplifier Gain tuning help
- Replies: 16
- Views: 103
- Fri Mar 08, 2024 8:43 pm
- Forum: Tuning Servos
- Topic: need some AMC analog amplifier Gain tuning help
- Replies: 16
- Views: 103
Re: need some AMC analog amplifier Gain tuning help
if i dial back the gain pots to where it is still no amount of +/-10v will move the servo any.