Search found 53 matches

by Igor
Tue Feb 04, 2020 6:35 pm
Forum: Hardware Interface Issues
Topic: KFLOP with linear encoder
Replies: 50
Views: 10492

Re: KFLOP with linear encoder

An encoder with manual mixing at a space of 293mm shows a position of 291838. Length of connecting wires is 0.8 meters. Kflop connected only one motor and encode,
can you show me an example of the right (standard) work of the encoder?
by Igor
Tue Feb 04, 2020 5:56 pm
Forum: Hardware Interface Issues
Topic: KFLOP with linear encoder
Replies: 50
Views: 10492

Re: KFLOP with linear encoder

The last two screenshots may be helpful to you in understanding the problem. I sent a video of "MOTOR OFF" there showed the behavior of the encoder when the axle is mixed into the manual. Adequate position miscalculation occurs. The counter stands still, but once the motor is turned on, endless runn...
by Igor
Tue Feb 04, 2020 11:15 am
Forum: Hardware Interface Issues
Topic: KFLOP with linear encoder
Replies: 50
Views: 10492

Re: KFLOP with linear encoder

PA_06 a pre-emptive co-factor to compensate for the reaction delay occurring in the current control circuits and position PA_10 retention current in% of the total phase current. Also affects the starting current at start of movement. Large values increase heating while increasing permissible acceler...
by Igor
Tue Feb 04, 2020 10:40 am
Forum: Hardware Interface Issues
Topic: KFLOP with linear encoder
Replies: 50
Views: 10492

Re: KFLOP with linear encoder

Good afternoon Tom. During these settings, there are no anomalies in the motor driver operation. Motor shuts in normal mode. Axle is mixed without breaks and any postage noises
by Igor
Mon Feb 03, 2020 8:44 pm
Forum: Hardware Interface Issues
Topic: KFLOP with linear encoder
Replies: 50
Views: 10492

Re: KFLOP with linear encoder

these are good diagrams
by Igor
Mon Feb 03, 2020 6:52 pm
Forum: Hardware Interface Issues
Topic: KFLOP with linear encoder
Replies: 50
Views: 10492

Re: KFLOP with linear encoder

1-it is true, correct
2 - not true - + . has 5mm/turn. TBI C3 2005
3 - is not true. At 96000 - making a test run at a distance of 240 mm. I have actual mixing only 237.45 mm. swarms of 97500 - 240 mm
4 - I made the necessary amendments. the encoder works?
by Igor
Mon Feb 03, 2020 3:27 pm
Forum: Hardware Interface Issues
Topic: KFLOP with linear encoder
Replies: 50
Views: 10492

Re: KFLOP with linear encoder

settings
by Igor
Mon Feb 03, 2020 6:10 am
Forum: Hardware Interface Issues
Topic: KFLOP with linear encoder
Replies: 50
Views: 10492

Re: KFLOP with linear encoder

Good afternoon Tom. I follow your instructions, as far as I understand. I have already pointed out the technical data. encoder (digital bar) has a resolution (accuracy). = 0.001 mm. The motor driver has 19,200 pulses per inch (64) = 1.2` / 360 = 300 steps. What information do you provide? I did not ...
by Igor
Sun Feb 02, 2020 10:11 am
Forum: Hardware Interface Issues
Topic: KFLOP with linear encoder
Replies: 50
Views: 10492

Re: KFLOP with linear encoder

Good afternoon Tom. I have a problem, and I don 't understand how to solve it. Digital line of long 293 mm (operating stroke) shows the value of 292176 pulses = 293mm (11.5354.. Inch) is not displayed correctly in the program. Output of 76.1156 mm when the expired value is 293mm! How to solve this p...
by Igor
Thu Jan 30, 2020 10:17 pm
Forum: Hardware Interface Issues
Topic: KFLOP with linear encoder
Replies: 50
Views: 10492

Re: KFLOP with linear encoder

1 - http://leadshine.com/producttypes.aspx? ... rvo-drives

2- This driver (motor) has 1, 2 *. 360 */1.2 * = 300 steps

3,4 - Accuracy outweighing in a taste test

5- no, the coder is not mobile