Search found 2527 matches
- Thu Mar 28, 2024 12:18 am
- Forum: C Programs
- Topic: Kogna debug suggestions
- Replies: 29
- Views: 152
Re: Kogna debug suggestions
Hi Steve, That's great you have CCS working. And thanks for the Linux notes. do you know what's at address 0x00712148? It's an IDLE instruction and it seems to be stuck there. Even though I load symbols for the firmware and my code, it doesn't know that location, although it looks like legit code in...
- Wed Mar 27, 2024 7:49 pm
- Forum: Noise, Grounding, Shielding Issues
- Topic: Reset kflop board
- Replies: 16
- Views: 50
Re: Reset kflop board
Hi Taras, Is the ALARM Estop_Bit 1030 ? If so, then I think when the noise glitch went away the bit would be cleared before you could ever see it on the screen. if (!ReadBit(Estop) || !ReadBit(MPG_Estop)) //!chan[AXISX].Enable || !chan[AXISYA].Enable || !chan[AXISYB].Enable || !chan[AXISZ].Enable ||...
- Wed Mar 27, 2024 5:38 pm
- Forum: Noise, Grounding, Shielding Issues
- Topic: Reset kflop board
- Replies: 16
- Views: 50
Re: Reset kflop board
Most likely noise on the EStop or MPG_Estop inputs were disabling all the Axes.
- Wed Mar 27, 2024 4:39 pm
- Forum: Noise, Grounding, Shielding Issues
- Topic: Reset kflop board
- Replies: 16
- Views: 50
Re: Reset kflop board
Hi Taras,
The reported error was "Axis Disabled". The GCode stopped because an Axis was disabled. That's why I asked you to post those things.
The reported error was "Axis Disabled". The GCode stopped because an Axis was disabled. That's why I asked you to post those things.
- Tue Mar 26, 2024 4:57 pm
- Forum: Noise, Grounding, Shielding Issues
- Topic: Reset kflop board
- Replies: 16
- Views: 50
Re: Reset kflop board
It doesn't seem to be an issue with USB or "turning off" or there would be a disconnect message. Instead it says "Axis Disabled". Are the Axes disabled? Check with the KMotion Axis Screen. Do you have anything that would disable the axes? Please post your Initialization C Program and Home Programs. ...
- Mon Mar 25, 2024 7:34 pm
- Forum: C Programs
- Topic: Kogna debug suggestions
- Replies: 29
- Views: 152
Re: Kogna debug suggestions
Hi Steve, That is correct. Rev 1.2 Kogna changes the connector label to JP2. Attached is the Target Configuration we use for CCS 11. The basic process is to "launch" this target configuration. Note the JTAG connects to the DSP and daisy chains also to the other 2 PRU processors in the chip that we d...
- Mon Mar 25, 2024 3:55 pm
- Forum: Noise, Grounding, Shielding Issues
- Topic: Reset kflop board
- Replies: 16
- Views: 50
Re: Reset kflop board
Hi Taras, During a tool change, the program freezes and after a while reports a connection error. What is your Tool Change doing? During milling, an error appears at different times and stops work. It is indicating the axes are disabled. Are they? Run KMotion.exe and when the error occurs check for ...
- Sat Mar 23, 2024 7:00 am
- Forum: C Programs
- Topic: Label from C program
- Replies: 3
- Views: 33
Re: Label from C program
Hi Taras,
See
#define N_USER_DATA_VARS 200
In KMotionDef.h
See
#define N_USER_DATA_VARS 200
In KMotionDef.h
- Sat Mar 23, 2024 12:57 am
- Forum: C Programs
- Topic: Label from C program
- Replies: 3
- Views: 33
Re: Label from C program
Hi Taras, See this Screen Editor Video. In the Add example KFLOP reads 2 User inputs (Edit Controls), converts them to a value, adds them, converts the result to a character string, and displays the string in a DROLabel on the screen. The Add example begins at 12:50 in the video. https://youtu.be/uQ...
- Wed Mar 20, 2024 8:47 pm
- Forum: Custom Screens, KMotionCNC Screen Editor
- Topic: no toolpath and tool shape is backwards
- Replies: 13
- Views: 62
Re: no toolpath and tool shape is backwards
Yes. Don't you remember we added this feature for you back in Jan? We gave you a patch for 5.3.1.