Dynomotion Forum

Hi Wayne, It's not exactly clear how your machine works or why if you have a bed following mode you would want to make corrections to not follow the bed. One option might be to have your bed following mode still use the Z axes by re-assigning the Coordinate Motion System. Do you need corrections in ...

Thank you for your patience and for taking the time to post back.

It’s not clear to me what you are saying. Are you saying the original control just output the same drive command to both motors hoping that the Slave would move the same as the Master without any feedback? You could do that with a C Program. But it seems that wouldn’t work well if there was differen...

No sorry we don’t release that.

If you send us the board we can attempt to reprogram. If that’s the problem then we can return it for shipping cost.

Hi Demon,

Sorry you are having problems.

We don’t find it cost effective to repair KFLOPs

We don’t release the image for the Flash memory.

Hi Noel,

That looks right to me. Except InputMode=NO_INPUT_MODE. How can you have a DAC Servo with no feedback?

The Slave should not be included in the Coordinate System as you have it.

Hi SIXMA, Its not clear what your application is, but assuming you would like to perform coordinated motion paths similar to a CNC machine, you might use our Coordinated Motion Class. See KM_CoordMotion . Because PC Applications are nor real-time the motion trajectory must be buffered in the control...

Hi William, I see now a bug regarding on how the OutputOffset was being applied (PWM channel was used as an Axis channel to get the offset). Please apply this patch to see if it resolves the problem. The KFLOP Firmware needs to be updated. After Updating it should report as Version 5.3.7X Please cop...

Hi William, Thanks for that. But this is the Data folder from the configuration that works, and it does properly reference the SnapAmp files. But I really wanted the Data folder from the 5.3.7 installation that shows the problem. I would like to verify everything was updated properly as well as try ...

Hi Tim

You might use the Program Exit Action.