Search found 1600 matches

by TomKerekes
Tue Jan 18, 2022 6:31 pm
Forum: Configuration Issues
Topic: Changed C program?
Replies: 11
Views: 57

Re: Changed C program?

Hi Scott, Please attach the C Program as a .c file rather than photos of pieces of it. To see what is happening please do do the following: #1 Import into KMotion All the settings from the C Program #2 On the Step Response Screen select axis 4 #3 On the Step Response Screen Push the Zero button. #4 ...
by TomKerekes
Mon Jan 17, 2022 7:11 pm
Forum: Configuration Issues
Topic: Changed C program?
Replies: 11
Views: 57

Re: Changed C program?

Hi Scott, I did try the download, initialize, and run function for the TK C program. It showed no errors, but the results trying to operate the spindle did not change. Jog commands would not work and if I try to initialize kmotion the spindle trys to go full speed as soon as I do. I got a cable for ...
by TomKerekes
Thu Jan 13, 2022 8:23 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 14
Views: 118

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Hi NOELNOG,

The 'e' format is scientific notation. It means move the decimal that many places to the right. So 1e9 = 1 billion. Which essentially turns off soft limits.

The soft limits are in encoder counts not inches.
by TomKerekes
Thu Jan 13, 2022 12:55 am
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 14
Views: 118

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Hi NOELNOG,

See the link on Homing I previously posted.

For "Park" command the Axes to move to zero.
by TomKerekes
Wed Jan 12, 2022 5:03 pm
Forum: Configuration Issues
Topic: Changed C program?
Replies: 11
Views: 57

Re: Changed C program?

Hi Scott, 1. Do I have to move the encoder inputs from the kanalog to the snap amp? No 3 Will the current assignments set up for the X axis be able to stay the same as they are set up now? No. I believe you have DC Motors with Brushes so the output Type will be "DC Servo" 4 Since I need to connect w...
by TomKerekes
Mon Jan 10, 2022 6:10 pm
Forum: Configuration Issues
Topic: Changed C program?
Replies: 11
Views: 57

Re: Changed C program?

Hi Scott, It seems KFLOP is not initialized. NoOutput.png In fact none of the Axes are configured. Seems the CNCLathe TK.c program was never executed. You need to Initialize the system before anything will work. But it isn't clear how Axis #4 was enabled. I do not know what you mean by show C progra...
by TomKerekes
Sun Jan 09, 2022 4:45 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 14
Views: 118

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Hi NOELNOG,

You pasted the entire program at the end. Instead only paste the "for" loop. A C program starts at the main() function. You can only have one main function in a program.
by TomKerekes
Sat Jan 08, 2022 8:24 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 14
Views: 118

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Correct. Add the ExternalButtons loop to the end of your INIT C Program so as soon as the system is initialized it executes the code forever.

See also here.
by TomKerekes
Fri Jan 07, 2022 7:33 pm
Forum: Configuration Issues
Topic: Changed C program?
Replies: 11
Views: 57

Re: Changed C program?

Hi Scott, I assume commanding DAC 4 drives the Spindle? After running the Init C Program and before Jog4=100000 does the Axis screen show axis #4 enabled? Does the Jog change the Destination? Does the Analog Screen show a non zero DAC 4 output? Any messages on the Console Screen? Command a Move of s...