Search found 2 matches

by rvitarella
Thu Jun 23, 2022 8:30 pm
Forum: User Machines
Topic: Pulse and Direction Signals Not Working
Replies: 5
Views: 1186

Re: Pulse and Direction Signals Not Working

I was only trying to use the gpio screen when I had the motors unset in the kflop, and toggling the checkbox would change the dir, and/or step the motor. To check if the direction/pulse signals were getting sent I was using the motor teknic clearpath software (MSP), and the position command and dire...
by rvitarella
Thu Jun 23, 2022 1:30 pm
Forum: User Machines
Topic: Pulse and Direction Signals Not Working
Replies: 5
Views: 1186

Re: Pulse and Direction Signals Not Working

How can you home the system without the Enable on? How are you Homing? We are using Clearpath motors, and they are setup to home on enable. We have the motor enable signals grouped into 2 enables. The first is CN1_Out_1 36, and the second is CN1_Out_14 38. what bit is the Enable? #define CN1_Out_1 ...