Search found 5 matches

by sawel68
Sun May 22, 2022 5:14 am
Forum: Hardware Interface Issues
Topic: Unexpected Motion Buffer Starved
Replies: 8
Views: 1044

Re: Unexpected Motion Buffer Starved

Thanks Tom! <<Note when GCode hits a limit and feed holds to stop you must push Stop to halt the GCode and be allowed to Jog or Run GCode again.>> I didn’t do this, that’s why it didn’t work. For some reason it wasn't obvious to me.)) Now everything works. Thanks again. PS. If, after stopping by the...
by sawel68
Sat May 21, 2022 4:33 am
Forum: Hardware Interface Issues
Topic: Unexpected Motion Buffer Starved
Replies: 8
Views: 1044

Re: Unexpected Motion Buffer Starved

I assigned to variable LimitSwitchOption 0x12f on all 4 axes. I explore only on the axis Z. When controlled manually, the axis adequately responds to movements and the limit sensor. But, when I run the G code for execution, then after hitting the limit sensor and stopping the axis, it is necessary t...
by sawel68
Fri May 20, 2022 7:50 am
Forum: Hardware Interface Issues
Topic: Unexpected Motion Buffer Starved
Replies: 8
Views: 1044

Re: Unexpected Motion Buffer Starved

Hello! Thanks Tom for the quick response! According to your advice, I installed version 4.35f. But the problem hasn't gone away. I have tried different limit switch modes. LimitSwitchOption 0x10f, 0x11f, 0x12f When moving by hand, no error occurs. But when I type in a line, let's say Z100, as soon a...
by sawel68
Thu May 19, 2022 1:50 pm
Forum: Hardware Interface Issues
Topic: Unexpected Motion Buffer Starved
Replies: 8
Views: 1044

Unexpected Motion Buffer Starved

Hello! There is a problem on my machine. If the limit sensor of any axis is driven over, a message appears. "Unexpected Motion Buffer Starved" Mach3 3.047.022 with license , Kflop 4.34. I tried different versions of mach3, nothing helps. I haven't been able to solve this problem for several days. He...