Search found 146 matches

by NOELNOG
Mon Feb 26, 2024 6:19 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 260
Views: 16258

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Hi Tom

question about the Konnect outputs, in the case i connect directly 24v electro valves or solenoids, do i have to add a flywheel diode? I know some relay card have already flywheel diodes installed but maybe not the solenoids or electro valves.

regards
by NOELNOG
Thu Feb 22, 2024 12:31 am
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 260
Views: 16258

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

oh ok, yes it is working ok, when i move the slider up and down the console prints all values right away. now what i noted is the output 26 in aux1 is unchecked, the first time i checked manually to observe the status, but after turn kflop off and turned back on, it appear unchecked, so o i need to ...
by NOELNOG
Wed Feb 21, 2024 11:44 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 260
Views: 16258

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

I set the VAR to 1, and console print the S value now.
TomKerekes wrote:
Wed Feb 21, 2024 10:46 pm
Is the SSO set to 1?
where is this parameter? i attached the log file after ran two g code programs with different spindle speeds, one is 10,000 and the other 18,000 rpm and it printed ok.
LogFile.txt
(1.52 KiB) Downloaded 4 times
by NOELNOG
Wed Feb 21, 2024 9:51 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 260
Views: 16258

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

I set on tool setup settings the S as "execut/wait/sync" The SpindlePWM.C, the bit 26 box is checked and the state box blinks, so does it mean that the output is working as PWM? now i am trying to figure it out how to set the spindlePWM C values, i entered in the MDI "S3000" and console printed " Sp...
by NOELNOG
Wed Feb 21, 2024 3:59 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 260
Views: 16258

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Thank you Tom. I moved the Konnects borards to JP4 and modified the init C program "AddKonnect_Aux0" . You might copy our KStep/KNozz PWM to analog circuit IsolatedPWMtoAnalog.png i have built this circuit already, i am trying to find out how to configure an output as PWM from JP6, do i need a C pro...
by NOELNOG
Tue Feb 20, 2024 10:33 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 260
Views: 16258

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Hi Tom

where i can get PWM signal output from Kflop if JP6 is connected to Konnect expansion boards? can i get PWM from one of the IOs of the expansion boards? to control my spindle speed.

regards
by NOELNOG
Mon Feb 19, 2024 6:35 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 260
Views: 16258

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Thank you very much. next project i will consider Kogna. have a nice day
by NOELNOG
Mon Feb 19, 2024 5:40 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 260
Views: 16258

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

TomKerekes wrote:
Mon Feb 19, 2024 5:32 pm
KFLOP only has LVTTL (3.3V) digital PWM Outputs. Can your Spindle accept that? Or does it need a 0-10V analog signal? If so youwould need an external circuit.
Yes my spindle only accepts 0-10v analog signal, can i build something to make the digital to analog?

Thanks
by NOELNOG
Mon Feb 19, 2024 1:04 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 260
Views: 16258

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Hi Tom Does Kstep work to interface kflop and servo drives? Does it have differential drivers and receivers for quadrature encoders? Or just is for stepper drivers? Rigth now i am using a 3rd party line differential driver and receiver but if kstep work would be better also it includes spindle speed...
by NOELNOG
Mon Feb 12, 2024 5:29 pm
Forum: Configuration Issues
Topic: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT
Replies: 260
Views: 16258

Re: SETTING UP KFLOP, KANALOG FOR NEW CNC ROUTER RETROFIT

Hi Tom. Hi Noel, Yes incremental mode. I see it accepts A/B quadrature commands. That would be preferable over Step/Direction. To connect to single ended inputs connect just one signal and leave the other unconnected. Never ground an output. Note single ended signals are more noise sensitive than di...