Search found 28 matches

by yethsts
Fri Aug 28, 2020 12:04 am
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: How to make the actual displacement of gantry as same as the KmotionCNC screen?
Replies: 2
Views: 603

Re: How to make the actual displacement of gantry as same as the KmotionCNC screen?

Yes, I have tried and archieved success. Thank you very much.

Yours,
Huang Lei
08-27-2020
by yethsts
Thu Aug 27, 2020 6:34 pm
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: How to make the actual displacement of gantry as same as the KmotionCNC screen?
Replies: 2
Views: 603

How to make the actual displacement of gantry as same as the KmotionCNC screen?

I run a gcode but found that real displacement of gantry is different with the coordinates in gcode in at least one axis, for example in Y axis direction. But the X,Y,Z numbers displayed in Kmotion CNC screen are as same as the X,Y,Z coordinate values in gcode. Then I do a test that used the Kmotion...
by yethsts
Wed Aug 26, 2020 1:48 am
Forum: Hardware Interface Issues
Topic: A little mistake in the Kstep connectors datasheet
Replies: 3
Views: 929

Re: A little mistake in the Kstep connectors datasheet

So you can delete this post/topic if you want, as your wish. donotreply
by yethsts
Tue Aug 25, 2020 11:56 pm
Forum: Hardware Interface Issues
Topic: A little mistake in the Kstep connectors datasheet
Replies: 3
Views: 929

Re: A little mistake in the Kstep connectors datasheet

Yes, you are right. I was wrong.

Yours,
yethsts
by yethsts
Tue Aug 25, 2020 6:14 pm
Forum: Hardware Interface Issues
Topic: A little mistake in the Kstep connectors datasheet
Replies: 3
Views: 929

A little mistake in the Kstep connectors datasheet

In Kstep connectors.pdf: 3.jpg I think the reverse flyback diodes in this picture should be placed between the relay0+ and relay0-(not between relay0- and gnd), or relay1+ and relay1-, isn't it? And this picture told us that the users should add the flyback diodes by themselves, right? Yours 08-25-2...
by yethsts
Wed Aug 19, 2020 11:46 pm
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: How can I define the axis name of a AC spindle motor?
Replies: 2
Views: 666

Re: How can I define the axis name of a AC spindle motor?

I think I understand your mean. I will try. Thank you very much.
by yethsts
Wed Aug 19, 2020 5:54 pm
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: How can I define the axis name of a AC spindle motor?
Replies: 2
Views: 666

How can I define the axis name of a AC spindle motor?

I use 5 step motors to drive the gantry. I use another step or a DC servo motor to drive the extruder. I also use a AC motor driven by a frequency converter to be the spindle motor. I will connect the frequency converter with the Kstep board, refer to the figure below: 2.jpg I will try to run the ex...
by yethsts
Tue Aug 18, 2020 4:23 pm
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: How to connect the extruder stepping motor as the E axis?
Replies: 4
Views: 809

Re: How to connect the extruder stepping motor as the E axis?

In the past I thought U and V are the slave channel motor of x and y axis direction, which will follow the motion of master channel motor automatically. But now maybe I was wrong.But how can I connect and define a motor as the U,or V, W axis? For the example, the function "DefineCoordSystem(0,1,3,-1...
by yethsts
Tue Aug 18, 2020 12:32 am
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: How to connect the extruder stepping motor as the E axis?
Replies: 4
Views: 809

How to connect the extruder stepping motor as the E axis?

I know in the system definition the A axis rotaes about the X Axis, the B axis rotates about the Y axis, and the C axis rotates about the Z axis. And U, V, W axises are the second axis parallel to X,Y,Z. And I also know in g code such as "G1 X90.6 Y13.8 E22.4" the "E22.4" means the extruder step mot...