Search found 3 matches

by DHMenchen
Wed Apr 03, 2019 2:47 pm
Forum: User Machines
Topic: Feed Hold, Axis Disabled, Soft Limit issues
Replies: 6
Views: 2395

Re: Feed Hold, Axis Disabled, Soft Limit issues

In a 5 minute job I got 3 feed hold errors this morning, I can click on the feed hold button and it resumes but it is still worrisome.

I have gotten a couple of Axis disabled G code errors, but then re run the same g code and it runs perfectly.

Many thanks for your help.
by DHMenchen
Tue Apr 02, 2019 8:05 pm
Forum: User Machines
Topic: Feed Hold, Axis Disabled, Soft Limit issues
Replies: 6
Views: 2395

Re: Feed Hold, Axis Disabled, Soft Limit issues

I am running 4.35b on a AXYZ CNC router table. I am using the Kflop and Kstep hardware. The Console messages are Kmotion DLL Soft limit Y - Rapid Traverse Job Halted, had just started a job that had run many times successfully. G Code Error Axis Disabled - GCode Aborted - in the middle of running a ...
by DHMenchen
Tue Apr 02, 2019 7:45 pm
Forum: User Machines
Topic: Feed Hold, Axis Disabled, Soft Limit issues
Replies: 6
Views: 2395

Feed Hold, Axis Disabled, Soft Limit issues

I am suddenly getting many Feed Hold issues, a good number of Axis Disabled issues and the occasional Soft Limit problem. The feed hold is not too bad, click and go, but the Axis Disabled and Soft Limit problems require a re Initialization and restart of the program. Only started getting these recen...