Search found 119 matches

by AmitKumar171
Tue Sep 14, 2021 10:39 am
Forum: Hardware Interface Issues
Topic: KONNECT I/O INPUT NOT DETECTING
Replies: 1
Views: 9

KONNECT I/O INPUT NOT DETECTING

Hi tom, I am using KFLOP+KONNECT combination for my machine. I have connected i/o to konnect input 0-7 and i have supplied +v to 0 of input commons and -v to the one side of i/o input switch, still not getting any input in 0-7 of konnect inputs, but if i connect same to konnect input 16-32 i am able...
by AmitKumar171
Fri Sep 03, 2021 6:24 am
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: Drilling Cycles giving Error in 3+2 Axis operation
Replies: 1
Views: 24

Drilling Cycles giving Error in 3+2 Axis operation

Hi Tom, I am using KFLOP+KONNECT for CNC machines. I have made code for drilling cycle supported by kmotion (Eg. G80....). And in 3+2 axis it is giving error of plane change and cycle is halted. Or it is running in horizontal direction, but it should run in vertical direction to make drills. I am no...
by AmitKumar171
Sun Aug 22, 2021 6:37 pm
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: Soft Limit issue with 5-Axis Positioning
Replies: 5
Views: 373

Re: Soft Limit issue with 5-Axis Positioning

Hi tom,

same issue for me also, i am using Kinematics5AxisTableAC.cpp., so which file need to change then rebuild the release? as per your previous post, there are many files, for my case which one i need to update.

Let me know of patch or how to do it ?

Waitingo for your kind reply.
by AmitKumar171
Fri Jul 02, 2021 11:40 am
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: Segments Visible while cutting a 3 Axis circle
Replies: 2
Views: 51

Segments Visible while cutting a 3 Axis circle

Hi tom, Thanks for previous replies. I am using KFLOP+Konnect setup. and output of axis is CW/CCW. I am facing one problem while machining circle in 3 Axis. I have generated a 3 axis program for a simple circle in aluminum. WhatsApp Image 2021-07-02 at 4.56.04 PM.jpeg WhatsApp Image 2021-07-02 at 4....
by AmitKumar171
Wed Feb 17, 2021 9:50 am
Forum: Hardware Interface Issues
Topic: How to use a servo with in built 23bit Absolute encoder with kflop
Replies: 23
Views: 852

Re: How to use a servo with in built 23bit Absolute encoder with kflop

Hi tom and cnc_freak Thanks for your replies. I got one rs485 to rs232 converter without flow control and i have done wiring according to the description mentions in kflop and leadshine manual and after running modbus master init v1, i am getting attached console response. Screenshot (119).png Pleas...
by AmitKumar171
Tue Feb 09, 2021 6:03 am
Forum: Hardware Interface Issues
Topic: How to use a servo with in built 23bit Absolute encoder with kflop
Replies: 23
Views: 852

Re: How to use a servo with in built 23bit Absolute encoder with kflop

cnc_freak wrote:
Tue Feb 09, 2021 5:46 am
From the output of the console i see you are sending the address 0x0460 and not the address 0x602c.
Hi cnc_freak,

Please tell me how to send the 0x602c, this address.

Waiting for your kind reply.
by AmitKumar171
Tue Feb 09, 2021 6:02 am
Forum: Hardware Interface Issues
Topic: How to use a servo with in built 23bit Absolute encoder with kflop
Replies: 23
Views: 852

Re: How to use a servo with in built 23bit Absolute encoder with kflop

Hi tom, thanks for your reply. What kind of converter do you have? I have below converter, and manual. https://www.hexin-technology.com/shared/manual/HXSP-485_RS-232_RS-485_UserManual.pdf https://www.hexin-technology.com/RS-232_To_RS-485_Converter-Product-257.html How is it wired? This connector has...
by AmitKumar171
Mon Feb 08, 2021 1:30 pm
Forum: Hardware Interface Issues
Topic: How to use a servo with in built 23bit Absolute encoder with kflop
Replies: 23
Views: 852

Re: How to use a servo with in built 23bit Absolute encoder with kflop

You have to be more specific. What have you tried exacly? Do you managed to establish serial communication with the drive via kanalog? What is the console responding when you are running the ModubusMasterv1.c ? Hi there, thanks for your reply. it looks like i was not able to establish serial commun...
by AmitKumar171
Sat Feb 06, 2021 8:14 am
Forum: Hardware Interface Issues
Topic: How to use a servo with in built 23bit Absolute encoder with kflop
Replies: 23
Views: 852

Re: How to use a servo with in built 23bit Absolute encoder with kflop

cnc_freak wrote:
Fri Feb 05, 2021 9:38 am
It is well writen in the commends of the c programm ModbusMasterv1.c.
Hi there,

thanks for your reply.

I have tried it and its not working, any suggestions???

Waiting for your kind reply.
by AmitKumar171
Fri Feb 05, 2021 8:43 am
Forum: Hardware Interface Issues
Topic: How to use a servo with in built 23bit Absolute encoder with kflop
Replies: 23
Views: 852

Re: How to use a servo with in built 23bit Absolute encoder with kflop

Hi Amit, See the \C Programs\RS232\ModBusModbusMasterVer1.c example. Modify the ModbusMaster_MonitorList table to continuously read those registers into MBRegisters. Then modify ModbusMaster_RegUnload() to convert the MBRegisters into the KFLOP Axis Positions when appropriate. Hi tom, Thanks for yo...