Search found 128 matches

by AmitKumar171
Wed Dec 22, 2021 5:33 am
Forum: C Programs
Topic: Axis Movement Restriction Before Homing
Replies: 3
Views: 57

Re: Axis Movement Restriction Before Homing

Hi Amit, You might not enable the Axes in the INIT C Program. Instead enable the Axes in the Home Program. You might also not reset the machine position to 0 in the INIT C Program as the encoder positions are likely to be still valid after an EStop. To enable axis 0 at the current encoder position ...
by AmitKumar171
Tue Dec 21, 2021 1:34 pm
Forum: C Programs
Topic: Axis Movement Restriction Before Homing
Replies: 3
Views: 57

Axis Movement Restriction Before Homing

Hi tom , I am using KFLOP+ Konnect for my machine. I am using one Homing program (Simple Home 3axis.c default program). and I want to restrict all axis movement until homing is done on the machine. Because before homing soft limit is not active as i defined soft limit in its homing program and it hi...
by AmitKumar171
Mon Dec 20, 2021 7:20 am
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: INVALID_ZERO_NEG_CONSTRAINT error while running 5 axis G code
Replies: 3
Views: 65

Re: INVALID_ZERO_NEG_CONSTRAINT error while running 5 axis G code

Hi tom, Thanks for the earlier reply. Only INIT file is running in thread - 1 , which has soft limit program attached with it (Soft limit is defined in axis definition files and checkdistancetostop also running in infinite for loop). So does that soft limit making that error? Waiting for kind reply.
by AmitKumar171
Sat Dec 18, 2021 9:29 am
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: INVALID_ZERO_NEG_CONSTRAINT error while running 5 axis G code
Replies: 3
Views: 65

INVALID_ZERO_NEG_CONSTRAINT error while running 5 axis G code

Hi Tom, I am using Kflop+Konnect for my 5 Axis cnc machine. I am facing strange problem (INVALID_ZERO_NEG_CONSTRAINT) while running attached g code. I have attached the trajectory planner settings and G code in which i am facing the error. Even i tried increasing decimal in g code as well but still ...
by AmitKumar171
Thu Sep 30, 2021 5:54 am
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: Drilling Cycles giving Error in 3+2 Axis operation
Replies: 7
Views: 237

Re: Drilling Cycles giving Error in 3+2 Axis operation

Hi tom, Thanks for your kind reply. That looks correct to me. With G17 (XY Plane) the G83 drill direction is to be in GCode Z direction. With RTCP on and the part rotated 90 degrees to move the tool tip in Z Axis #1 must change. Same as with a G1 command with that orientation to mill in Z axis #1 wo...
by AmitKumar171
Wed Sep 29, 2021 9:50 am
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: Drilling Cycles giving Error in 3+2 Axis operation
Replies: 7
Views: 237

Re: Drilling Cycles giving Error in 3+2 Axis operation

Hi tom, Thank you for earlier reply. I have attached a drilling cycle G code that runs in 3+2 axis with RTCP on. and instead of moving spindle in actual z direction, it is moving in actual Y direction. and video of run program also here uploaded in google drive. https://drive.google.com/file/d/1Jbx7...
by AmitKumar171
Tue Sep 21, 2021 6:08 am
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: Drilling Cycles giving Error in 3+2 Axis operation
Replies: 7
Views: 237

Re: Drilling Cycles giving Error in 3+2 Axis operation

Hi Amit, Post a small GCode program that gives the error. What is the exact error message that you are seeing? It gives error of different plane in drilling cycle. Assume we are drilling in yz plane and with RTCP that plane changes with table rotation. So it give error of wrong plane with Z move or...
by AmitKumar171
Tue Sep 21, 2021 6:06 am
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: Tool Diameter compensation giving error of gauge
Replies: 3
Views: 98

Re: Tool Diameter compensation giving error of gauge

Hi tom,

Thank you for your reply.

Does this radius compensation works in 3+2 axis mode with RTCP on (G43.4).

If yes then is there anything to enable in settings??

If not then how can we make it work ?

Waiting for your kind reply.
by AmitKumar171
Mon Sep 20, 2021 12:32 pm
Forum: KMotionCNC, G Code Files, Offsets, Post Process
Topic: Tool Diameter compensation giving error of gauge
Replies: 3
Views: 98

Tool Diameter compensation giving error of gauge

Hi tom, I am using Kflop+konnect for my cnc machine. I am facing one problem in G40, G41, G42 (Tool diameter compensation). It is giving error of tool gauge while simulation as well as actual run of g code on machine. I am attaching G code and screenshot of error i am facing. gcode.nc.txt tool-table...
by AmitKumar171
Tue Sep 14, 2021 10:39 am
Forum: Hardware Interface Issues
Topic: KONNECT I/O INPUT NOT DETECTING
Replies: 1
Views: 70

KONNECT I/O INPUT NOT DETECTING

Hi tom, I am using KFLOP+KONNECT combination for my machine. I have connected i/o to konnect input 0-7 and i have supplied +v to 0 of input commons and -v to the one side of i/o input switch, still not getting any input in 0-7 of konnect inputs, but if i connect same to konnect input 16-32 i am able...