Search found 20 matches

by Rasta
Fri Sep 17, 2021 10:21 pm
Forum: Hardware Interface Issues
Topic: Kanalog jp13
Replies: 4
Views: 39

Re: Kanalog jp13

Thank you Tom,
You are a Champ!
Regards
Mariano
by Rasta
Thu Sep 16, 2021 11:08 pm
Forum: Hardware Interface Issues
Topic: Kanalog jp13
Replies: 4
Views: 39

Re: Kanalog jp13

ThanksTom , for the prompt answer
Does it means that for voltage source I can use the Kanalog 5v and ground pins to supply the voltage source? If so please can you please provide connection guidance?
Regards
Mariano
by Rasta
Thu Sep 16, 2021 8:34 am
Forum: Hardware Interface Issues
Topic: Kanalog jp13
Replies: 4
Views: 39

Kanalog jp13

Hi;
I’m trying to turn on a AC SSR , directly from the Kanalog JP 13 Opto_0_plus ,and Opto_0_neg , the SSR
Dc input is from 3v to 30vdc .
Can you please tell me is it’s possible? And if so , what is the voltage that I should get between Opto_0_plus and Opto_0_neg..
Thank you
Mariano
by Rasta
Thu Sep 09, 2021 12:48 am
Forum: Custom Screens, KMotionCNC Screen Editor
Topic: Toggle Button and low high bit
Replies: 6
Views: 77

Re: Toggle Button and low high bit

Please disregard my last message
I found the problem ,
I did not Write the script , silly me
Thank you for your help

Mariano
by Rasta
Thu Sep 09, 2021 12:40 am
Forum: Custom Screens, KMotionCNC Screen Editor
Topic: Toggle Button and low high bit
Replies: 6
Views: 77

Re: Toggle Button and low high bit

Yes , I have renamed the screen Wire Edm .scr On the main tab I select the screen script Wire Edm.scr Then go back to the Control Select screen and to just try it , modify the 46 Momentarily button , by changing its name to Main Pump, then I observed that the name Main Pump, appears on the button no...
by Rasta
Wed Sep 08, 2021 12:38 am
Forum: Custom Screens, KMotionCNC Screen Editor
Topic: Toggle Button and low high bit
Replies: 6
Views: 77

Re: Toggle Button and low high bit

HI Tom;
I have followed the directions in the Toggle button video , and yes I can modify the buttons , but after I exit KmotionCnc , and fire
it back again ,the buttons or anything that I have done is no updated , can you please tell me what im doing wrong?
Regards
Mariano
by Rasta
Tue Nov 24, 2020 11:35 pm
Forum: User Machines
Topic: 6 axis wire edm
Replies: 17
Views: 1384

Re: 6 axis wire edm

Hi Tom; one question on microstepping setting Im having problems with my stepper motor not being as smooth as I would like with the 10 microstep setting in the driver as I have no other available setting ..Can you please tell me if I can use the microstepping setting in kmotion, so I can combine bot...
by Rasta
Tue Nov 24, 2020 11:25 pm
Forum: User Machines
Topic: 6 axis wire edm
Replies: 17
Views: 1384

Re: 6 axis wire edm

Thank you Tom
Regards
Mariano
by Rasta
Sun Nov 08, 2020 8:27 am
Forum: User Machines
Topic: 6 axis wire edm
Replies: 17
Views: 1384

Re: 6 axis wire edm

Hi Tom; thank you for your help, got the program doing what it supposed to do. This program , knows were the limits are , and will throw a feed hold and wont allow to pass any limit, that has been set This bring me to the new feature that I want to implement. I want the controller to look ahead in t...
by Rasta
Fri Nov 06, 2020 12:08 am
Forum: User Machines
Topic: 6 axis wire edm
Replies: 17
Views: 1384

Re: 6 axis wire edm

HI Tom, I have all axis going on a bench with my spare kflop/kanalog , and i want to implement the home routine at the moment Im concentrating in the Z axis , and using jp15 in the kanalog , by hooking up a N.C. switch via a +5v supply to the + termional of the jp15 IO 138. I can see the tick mark i...