Group: DynoMotion	Message: 10265	From: cyfer_luis	Date: 10/8/2014
Subject: mach3 reset button don't stop flashing

Hi all,
i would use kflop with mach3.
i've created the init file following the instructions in the help kflop file.
i've start mach3, select kflop and press reset button.
mach3 displays kflop status ok but the reset button flashing and display emergency button is pressed.
i've not the emergency button.

thaks
Cyfer

Group: DynoMotion	Message: 10268	From: Tom Kerekes	Date: 10/8/2014
Subject: Re: mach3 reset button don't stop flashing

Hi Cyfer,

Mach3 doesn't allow the EStop input to be disabled. You must configure it to something unused like port0 Pin0 and active high.

Mach3 | Config | Ports&Pins | Inputs | EStop

Regards

Group: DynoMotion	Message: 10271	From: cyfer_luis	Date: 10/8/2014
Subject: Re: mach3 reset button don't stop flashing

thanks, it works!

Saluti
Cyfer