(Program Creation Date: 09/08/2016 09:35 )
(G-Code Part Number: )
(6018448012)
(a7615)
(test)
M102
		G20	M03	S	2500		M100								(Inch Units & Start Counter & Spindle On)
N01	(	G00				A	5							)	(Approach from a distance equal to part thickness)
N02	(	G00						x	1.9944207301152	y	1.7985477820224	)	(Approach from a distance equal to part thickness)
N03	(	G00						x	1.8584207301152				)	(Rough Cut Start Position)
N04	(	G01		F	5			x	1.8184207301152				)	(Rough Cutting)
N05	(	G00									y	1.8185477820224	)	(Lift up .02 IN Distance)
N06	(	G00						x	1.8584207301152				)	(Return to starting position)
N07	 	G00				A	5							 	(Approach from a distance equal to part thickness)
N08	 	G00				A	5	x	1.9944207301152	y	1.7885477820224	 	(Approach from a distance equal to part thickness)
N09	 	G00						x	1.8584207301152				 	(Finish Cut Start Position)
N10	 	G01		F	5			x	1.8184207301152				 	(Finish Cut)
N11	 	G00									y	1.8985477820224	 	(Lift up .1 IN Distance)
N12	(	G00						x	0	y	0	)	(Move X & Y To Start Position)
N13	(	G00				A	0							)	(Move A To Start Position)
N14	(	G01		F	0			x	0	y	0	)	(Cutting)
N15	(	G00									y	0	)	(Move Y up the hight of the part before the move)
N16	(	G00				A	0	x	0	y	0	)	(Start Position)
N17	(	G01		F	0			x	0	y	0	)	(Cutting)
N18	(	G00						x	0	y	0	)	(Retract to Start Position)
N19	(	G00				A	0	x	0	y	0	)	(Move X & Y To Start Position)
N20	(	G00				A	0							)	(Move A To Start Position)
N21	(	G01		F	0			x	0	y	0	)	(Cutting)
N22	(	G00						x	0	y	0	)	(Move X and Y back 0.1 before home)
N23		G00						x	3	y	2.65	M09			(Home X and Y)
N24		G00				A	115								(Home A)
N25			M08	S	750										(Blow Off Program and Slow Spindle)
N26					M101										(Turn Off Air Blow)
N27			M30												(Program End)