Hi all,
I am trying to use some of the math function of the Kmotion 4.19 version for my c program. While sin and cos functions are accepted, the asin and pow functions are not recognized. The compiler generats error:
tcc: undefined symbol 'asin'
is there any clue?
thanks
Azeddien
Group: DynoMotion
Message: 196
From: Tom Kerekes
Date: 3/6/2010
Subject: Re: Math Fuctions problem
Azeddien,
Those routines were excluded by mistake. Here is a patch. It will report as Version 4.19d. Remove the .v419d from the filename and copy to the DSP_KFLOP directory, then flash the firmware using FLASH New Version on the configuration screen
Hi Tom, May I get the same file for the Kmotion board? Regards
--- On Sun, 3/7/10, Tom Kerekes <tk@...> wrote:
From: Tom Kerekes <tk@...> Subject: Re: [DynoMotion] Math Fuctions problem To: DynoMotion@yahoogroups.com Date: Sunday, March 7, 2010, 1:52 AM
Azeddien,
Those routines were excluded by mistake. Here is a patch. It will report as Version 4.19d. Remove the .v419d from the filename and copy to the DSP_KFLOP directory, then flash the firmware using FLASH New Version on the configuration screen
