Group: DynoMotion	Message: 12456	From: embraced338	Date: 10/29/2015
Subject: MPGSmoothHardwareEnc

Hello,

How does one connect an MPG when using this program for the MPG?

Does the line:

#define MPG_INPUT_AXIS 6

mean to connect the +A and +B channels to JP5 pin 5 and 6 respectively (IO 40 and 41?)

Thanks,

Lindsay

Group: DynoMotion	Message: 12457	From: Russ Larson	Date: 10/29/2015
Subject: Re: MPGSmoothHardwareEnc

YES,

This is just assigning the channel you will be connecting the MPG into, so the default is AXIS 6 channel, since most machines do not have more than five axis.

Russ

From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com]
Sent: Thursday, October 29, 2015 8:38 AM
To: DynoMotion@yahoogroups.com
Subject: [DynoMotion] MPGSmoothHardwareEnc

Hello,

How does one connect an MPG when using this program for the MPG?

Does the line:

#define MPG_INPUT_AXIS 6

mean to connect the +A and +B channels to JP5 pin 5 and 6 respectively (IO 40 and 41?)

Thanks,

Lindsay

Group: DynoMotion	Message: 12458	From: TK	Date: 10/29/2015
Subject: Re: MPGSmoothHardwareEnc

As Russ correctly points out that is the KFLOP Axis Channel but not necessarily the Encoder Channel to use. Please see if this wiki article helps:
http://dynomotion.com/wiki/index.php?title=Channels_Channels_Channels

HTH
Regards
TK

On 10/29/2015 6:36 AM, 'Russ Larson' rdlarson@... [DynoMotion] wrote:

YES,

This is just assigning the channel you will be connecting the MPG into, so the default is AXIS 6 channel, since most machines do not have more than five axis.

Russ

From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com]
Sent: Thursday, October 29, 2015 8:38 AM
To: DynoMotion@yahoogroups.com
Subject: [DynoMotion] MPGSmoothHardwareEnc

Hello,

How does one connect an MPG when using this program for the MPG?

Does the line:

#define MPG_INPUT_AXIS 6

mean to connect the +A and +B channels to JP5 pin 5 and 6 respectively (IO 40 and 41?)

Thanks,

Lindsay